Abstract:Ultrahigh‐speed casting is the most remarkable feature of billet high‐efficiency continuous casting. The transient fluid flow, heat transfer, and solidification behavior under different casting speeds, submerged entry nozzle (SEN) parameters, and mold electromagnetic stirring (M‐EMS) are investigated using a 3D transient mathematical model. The results show that a typical roll flow pattern is generated for all casting speeds, while a third small recirculation zone developed near the solidified shell at the casting speed of 6.0 m min−1. When the casting speed increases, the impact depth of the molten steel increases from 0.748 to 0.844 m, the velocity and level fluctuation at the steel/slag interface increases, the high‐temperature zone moves downward, and the shell thickness is reduced from 16.2 to 11.1 mm. As the SEN inner diameter and immersion depth increases, the impact depth increases, the velocity and level fluctuation at the steel/slag interface decreases, and the shell thickness at the mold exit is ≈11.0 mm. When the SEN immersion depth and inner diameter are 120 and 40 mm, respectively, the flow and temperature fields in the mold are the most appropriate. In addition, the M‐EMS have a great effect on the fluid flow and heat transfer behavior. A coupled 3D numerical model is established to study the fluid flow, heat transfer, and solidification in a billet continuous casting mold under different casting speeds, submerged entry nozzle (SEN) inner diameters, SEN immersion depths, and mold electromagnetic stirring (M‐EMS). The velocity field, temperature field, steel/slag level fluctuation, and the growth of solidified shell are analyzed comparatively.

Numerical simulation of fluid flow and free surface fluctuations during wheel and belt casting process

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Numerical Modeling of Transient Flow Characteristics on the Top Surface of a Steel Slab Continuous Casting Strand Using a Large Eddy Simulation Combined with Volume of Fluid Model

Numerical Simulation of Transient Flow Patterns of Upper Swirls in Continuous Slab Casting Moulds

Numerical Simulation on Free Surface in the Mold of Slab Continuous Caster at Low Casting Speed with MFCD

Coupling Simulation and Mechanism Analysis of Grain Formation and Growth in Horizontal Centrifugal Casting

Modelling of Level Fluctuation in Continuous Casting

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

Instability Of Fluid Flow And Level Fluctuation In Continuous Thin Slab Casting Mould

Modeling and Simulation of the Fluid Flow in Continuous Slab Casting Mould

Transient flow and mold flux behavior during ultra-high speed continuous casting of billet

Numerical Simulation of Casting Filling Process of Composites Reinforced with Nano SiC Based on Smoothed Particle Hydrodynamics

Numerical Simulation of Fluid Flow and Heat Transfer During Mold Filling for Die Casting

Numerical Simulation on Multiple Physical Fields Behaviors in Billet Continuous Casting with Different Stirrer Positions

Numerical Investigation on Motion and Removal of Inclusions in Continuous Casting Tundish with Multiorifice Filter

Modeling of fluid flow and centerline segregation in continuous thin slab casting with LES method

NUMERICAL SIMULATION OF SURFACE OSCILLATION IN CONTINUOUS CASTING MOLD

Numerical Simulation of Solidification Process in an SCR Wheel and Belt Continuous Caster

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach