Abstract:Understanding the essence of the flow oscillations within a submerged-entry nozzle (SEN) is essential to control flow patterns in the continuous casting mold and consequently increase the superficial quality of steel products. A numerical study of the mesoscopic fluid-particle flow in a bifurcated pool-type SEN under steady operating conditions is conducted using the lattice Boltzmann method (LBM) coupled with the large eddy simulation (LES) model. The accuracy of the model has been verified by comparing vortex structures and simulated velocities with published experimental values. The LBM modeling is also verified by comparing the “stair-step” jet patterns observed in the experiment. The geometrical parameters and operational conditions of physical experiments are reproduced in the simulations. By comparing the time-averaged velocities of Reynolds-averaged Navier–Stokes equations (RANS) with LBM models, transient mesoscopic fluid-particles and related vortex structures can be better reproduced within the SEN. The visualization of internal flow within the SEN is illustrated through the mass-less Discrete Phase Model (DPM) model. The trajectories show that the LBM–LES–DPM coupled model is good at predicting the transient vortical flow within the SEN. A large vortex is found inside the exit port and continuously changes in shape and size therein. The monitoring points and lines within the SEN are selected to illustrate the velocity variations and effective viscosity, which can reflect the oscillating characteristics even under stable operating conditions without changes at the exit from the SEN. Furthermore, the formation, development, diffusion, and dissipation of the vortex structures from the exit port of the SEN are also investigated using the Q criteria. The comparison of the power spectrum with high-frequency components along the exit port indicates that the flow oscillations must originate from within the SEN and are intensified in the exit port. The mesoscopic LBM model can replicate the fluid-particle flow and vortex structure transmission as well as their turbulence effects inside the SEN in detail.

Numerical Simulation of Transient Flow Patterns of Upper Swirls in Continuous Slab Casting Moulds

Modeling and Simulation of the Fluid Flow in Continuous Slab Casting Mould

Numerical Modeling of Transient Flow Characteristics on the Top Surface of a Steel Slab Continuous Casting Strand Using a Large Eddy Simulation Combined with Volume of Fluid Model

Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold

Modeling of fluid flow and centerline segregation in continuous thin slab casting with LES method

Large Eddy Simulation of Turbulent Flow with the Effects of Dc Magnetic Field and Vortex Brake Application in Continuous Casting

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Mathematical simulation of two-phase flow and slag entrainment during steel bloom continuous casting

Numerical simulation of fluid flow and free surface fluctuations during wheel and belt casting process

Modelling of Level Fluctuation in Continuous Casting

Experimental research on the flow instability and level fluctuation in continuous thin slab casting mould

Mathematical Modeling of Transient Submerged Entry Nozzle Clogging and Its Effect on Flow Field, Bubble Distribution and Interface Fluctuation in Slab Continuous Casting Mold

NUMERICAL SIMULATION OF SURFACE OSCILLATION IN CONTINUOUS CASTING MOLD

Water Modeling of the Fluid Flow Instability in Continuous Thin Slab Casting Mould

Mesoscopic Fluid-Particle Flow and Vortex Structural Transmission in a Submerged Entry Nozzle of Continuous Caster

Instability Of Fluid Flow And Level Fluctuation In Continuous Thin Slab Casting Mould

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating

Large Eddy Simulation of Transient Flow Field in Continuous Casting Mold

Large Eddy Simulation on the Two‐Phase Flow in a Water Model of Continuous Casting Strand with Gas Injection

Large Eddy Simulation of Unconfined Turbulent Swirling Flow

Numerical Simulation of Flow Field in the Continuous Casting Mold by EMBR