Abstract:The surface quality of the continuous casting strands is closely related to the initial solidification of liquid steel in the vicinity of the mold meniscus, and thus the clear understanding of the behavior of molten steel initial solidification would be of great importance for the control of the quality of final slab. With the development of the mold simulator techniques, the complex interrelationship between the solidified shell surface profile, heat flux, shell thickness, mold level fluctuation, and the infiltrated slag film was well illustrated in our previous study. As the second part, this article investigated the effect of the mold oscillation frequency, stroke, and mold level fluctuation on the initial solidification of the molten steel through the conduction of five different experiments. Results suggested that in the case of the stable mold level, the oscillation marks (OMs) exhibit equally spaced horizon depressions on the shell surface, where the heat flux at the meniscus area raises rapidly during negative strip time (NST) period and the presence of each OMs on the shell surface is corresponding to a peak value of the heat flux variation rate. Otherwise, the shell surface is poorly defined by the existence of wave-type defects, such as ripples or deep depressions, and the heat flux variation is irregular during NST period. The rising of the mold level leads to the longer-pitch and deeper OMs formation; conversely, the falling of mold level introduces shorter-pitch and shallower OMs. With the increase of the mold oscillation frequency, the average value of the low-frequency heat flux at the meniscus increases; however, it decreases when the mold oscillation stroke increases. Additionally, the variation amplitude of the high-frequency temperature and the high-frequency heat flux decreases with the increase of the oscillation frequency and the reduction of the oscillation stroke.

Instability Of Fluid Flow And Level Fluctuation In Continuous Thin Slab Casting Mould

Experimental research on the flow instability and level fluctuation in continuous thin slab casting mould

Water Modelling Of Level Fluctuation In Thin Slab Continuous Casting Mould

Water Modeling of the Fluid Flow Instability in Continuous Thin Slab Casting Mould

Influence of Process Factors on the Characteristic Parameters of Unstable Fluid Flow in a Continuous Thin Slab Casting Mould

Modelling of Level Fluctuation in Continuous Casting

Modeling and Simulation of the Fluid Flow in Continuous Slab Casting Mould

Study of process parameters on level fluctuation in CSP mould of continuous thin slab casting

Modeling of fluid flow and centerline segregation in continuous thin slab casting with LES method

Fluid flow and solidification in continuous thin slab casting mold

Mold Simulator Study of the Initial Solidification of Molten Steel in Continuous Casting Mold: Part II. Effects of Mold Oscillation and Mold Level Fluctuation

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold

Numerical Simulation of Transient Flow Patterns of Upper Swirls in Continuous Slab Casting Moulds

Numerical simulation of fluid flow and free surface fluctuations during wheel and belt casting process

Numerical Simulation on Free Surface in the Mold of Slab Continuous Caster at Low Casting Speed with MFCD

Simulation Study on Transient Periodic Heat Transfer Behavior of Meniscus in Continuous Casting Mold

NUMERICAL SIMULATION OF SURFACE OSCILLATION IN CONTINUOUS CASTING MOLD

Transient flow and mold flux behavior during ultra-high speed continuous casting of billet

An Emulation System of Fluid Flow,temperature Distribution and Level Fluctuation in Continuous Casting Mould

Mathematical Model of Fluid Flow and Solidification in Mold Region of Continuous Slab Casting