Abstract:The characteristic positions of flow pattern, vortex centers in upper/lower recirculation zones, and impingement points on the narrow face of mold are identified, and their distribution in double roll flow and complex flow is analyzed. The interactive effect of casting speed, argon flow rate, and immersion depth of the submerged entry nozzle on the flow pattern is revealed. The flow pattern in an opaque mold cannot be readily visible, and worker experience plays a major role in controlling it, even though it has a significant impact on slab quality in a continuous casting (CC) mold. An Eulerian–Eulerian two‐fluid model is used to comprehensively study the two‐phase flow of argon and molten steel in a slab CC mold. The positions of vortex centers in upper/lower recirculation zones and the impingement point of jet flow on the narrow face of mold are identified and their distribution is analyzed. The interactive effects of casting speed, argon flow rate, and immersion depth of the submerged entry nozzle (SEN) on the flow pattern inside the mold are revealed. 2D and 3D flow pattern regimes are plotted and the boundary lines and boundary surfaces are fit with exponential functions and ternary functions, respectively. To obtain a double roll flow in the slab CC mold investigated, the relation among argon flow rate (Qg ), casting speed (Cl ), and the immersion depth of the SEN (SSEN ) should satisfy, Qg

Water Modeling of the Fluid Flow Instability in Continuous Thin Slab Casting Mould

Instability Of Fluid Flow And Level Fluctuation In Continuous Thin Slab Casting Mould

Water Modelling Of Level Fluctuation In Thin Slab Continuous Casting Mould

Experimental research on the flow instability and level fluctuation in continuous thin slab casting mould

Influence of Process Factors on the Characteristic Parameters of Unstable Fluid Flow in a Continuous Thin Slab Casting Mould

Modeling and Simulation of the Fluid Flow in Continuous Slab Casting Mould

Modelling of Level Fluctuation in Continuous Casting

Modeling of fluid flow and centerline segregation in continuous thin slab casting with LES method

Fluid flow and solidification in continuous thin slab casting mold

Mathematical Model of Fluid Flow and Solidification in Mold Region of Continuous Slab Casting

Numerical Simulation of Transient Flow Patterns of Upper Swirls in Continuous Slab Casting Moulds

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold

Fluid Flow in Continuous Casting Mold with a Configured Nozzle

Numerical Simulation on Free Surface in the Mold of Slab Continuous Caster at Low Casting Speed with MFCD

NUMERICAL SIMULATION OF SURFACE OSCILLATION IN CONTINUOUS CASTING MOLD

Mathematical Modeling of Transient Submerged Entry Nozzle Clogging and Its Effect on Flow Field, Bubble Distribution and Interface Fluctuation in Slab Continuous Casting Mold

Simulation of Spatial Distribution of Multi-Size Bubbles in a Slab Continuous-Casting Mold Water Model

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Hydraulic Modeling on Flow Behavior in High-Speed Billet Continuous Casting Mold Considering Hydrostatic Pressure and Solidified Shell

Study of process parameters on level fluctuation in CSP mould of continuous thin slab casting