Abstract:The aim of this study was to simulate the solidification process of beam blank continuous casting, and then find the reasons for the typical defects of the beam blank. A two-dimensional transient coupled finite element model has been developed to compute the temperature and stress profile in beam blank continuous casting. The enthalpy method was used in the heat conduction equation. The thermo-mechanical property in the mushy zone was taken into consideration in this calculation. It is shown that at the mold exit the thickness of the shell had its maximum value at the flange tip and its minimum value at the fillet. The temperature had a great fluctuation on the surface of the beam blank in the secondary cooling zone. At the unbending point, the surface temperature of the web was in the brittleness temperature range under the present condition. To ensure the quality, it is necessary to weaken the intensity of secondary cooling. At the mold exit the equivalent stress and strain have higher values at the flange tip and at the web. From the spray 1 to the unbending point, the maximum values of stress and strain gradually moved to the internal section of the flange tip and the web. However, whenever, there were bigger stress and strain values near the flange tip and the web than in the other parts, it must be very easy to generate cracks at those positions. Now, online verification of this simulation has been developed, which has proved to be very useful and efficient to instruct the practical production of beam blank continuous casting.

Numerical Simulation of Stress of Adjustment Sheet During Investment Casting Process

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Numerical Simulation of Solidification Process for Impeller Investment Casting Based on ProCAST

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Application and development of numerical simulation technology in Casting

Numerical Simulation of Thermal Stresses of Castings During Solidification Based on Personal Computer and Its Engineering Application

Simulation of Casting Stress of Low-pressure Casting Aluminum Alloy Wheel

Progress in numerical simulation of casting process

Study on numerical simulation of mold-filling and solidification processes of shaped casting

Research and Application of Foundry CAD/CAE System

NUMERICAL SIMULATION OF STRESS-STRAIN IN CASTING STEEL DURING SOLIDIFICATION AND FORMATION MECHANISM OF HOT-TEARING

Numerical Simulation of Thermal Stress During Directional Solidification of Simple Hollow Turbine Blades

Numerical Modelling of Chamfer Billet of High Carbon Steel During Continuous Casting

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Thermal stress simulation considering mechanical interaction between casting and mold

Numerical Simulation of Squeeze-Casting SiC3D/Al Ceramic Matrix Composites