Abstract:Welded hollow spherical joints are commonly used joints in space grid structures. An internal stiffener is generally adopted to strengthen the joints when large hollow spheres are used. To further strengthen it, external stiffeners can be used at the same time. In this study, axial compression tests are conducted on four full-scale 550 mm spherical joints. The failure modes and strengths of the tested joints are investigated. It shows that the external stiffeners are able to increase the strength of the joint up to 25%. A numerical model for large spherical joints with stiffeners is established and verified against the experimental results. Parametric studies are executed considering six main design factors using the verified model. It is found that the strength of the spherical joint increases as the thickness, height and number of the external stiffeners increase, and the hollow sphere's diameter has a neglectable effect on the enhancement caused by the external stiffeners. Based on the experimental and numerical results, a practical formula for the compressive bearing capacity of large welded hollow spherical joints with both internal and external stiffeners is proposed. The proposed formula gives a conservative prediction on the compressive capacity of large welded hollow spherical joints with both internal and external stiffeners.

Reinforcement Method of Large Openings in Cylindrical Shells

Study on Methods for the Reinforcement of Pressure Vessels with Large Openings

ANALYSIS OF BENDING MOMENT IN THE DESIGN OF REINFORCEMENT OF LARGE OPENING IN CYLINDER AS PER ASME CODE

Cantilever erection method and analysis of construction intern al forces for large-span spherical reticulated shells

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

The Analysis Methods of Reinforcements for Openings in Cylindrical Vessels in GB 150—2011

On compressive behavior of large welded hollow spherical joints with both internal and external stiffeners

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Pressure Vessel Opening Reinforcement Analysis and Various Kinds of Reinforcing Method Comparison

Effect of Openings on Elephant’s Foot Buckling of Large Oil Tanks

Analyses of Stresses in Cylindrical Shells of Medium Length with Arbitrary Open-Section

Finite Element Analysis of Opening Reinforcement for Strain Strengthening Pressure Vessel

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Stress Analysis of Large Oil Storage Tanks Based on Combined Cylindrical Shell

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

A Universal Design Method Based on Analysis for Cylindrical Shells with Nozzles Due to Internal Pressure, External Forces and Moments: Part II

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

STRESS CONCENTRATION ON THIN CYLINDRICAL SHELLS WITH LARGE NON-CIRCULAR OPENINGS

Stability of cylindrical shells with rectangular openings subjected to axial compression