Abstract:In this paper, we present the design, fabrication and measurement results of a 2D scanning mirror actuated by 1 × 10 piezoelectric Pb(Zr,Ti)O3 (PZT) cantilever actuators integrated on a thin silicon beam. A combination of bulk silicon micromachining based on a silicon-on-insulator (SOI) substrate and thin-film surface micromachining on a 5 µm thick Si device layer is used to fabricate the device. Multi-layers of Pt/Ti/PZT/Pt/Ti are deposited as electrode materials. A large silicon mirror plate (5 mm × 5 mm) and a 1 × 10 PZT cantilever array arranged in parallel are formed after the backside release process. The ten PZT cantilever actuators are electrically isolated from one another. The device can operate in three modes: bending, torsional and mixed (or combinational) modes. In bending mode, the first resonant frequency was measured to be 30 Hz and an optical deflection angle of ±8° was obtained when all ten cantilevers were actuated at 9 Vpp. In torsional mode, the resonant frequency was measured to be 89 Hz and an optical deflection angle of ±4.6° was obtained by applying a gradually declining ac voltage started at 8 Vpp to two sets of actuators, where each set comprises five cantilever actuators of the said 1 × 10 array, i.e. 1–5 and 6–10. A 2D raster scanning pattern was achieved in the mixed mode when the bending mode was carried out by cantilever actuators of 4–7 and the torsional modes were exercised by two different sets of cantilever actuators, i.e. 1–3 and 8–10, under opposite biasing direction. This mixed mode operation mechanism demonstrates the first 2D raster scanning mirror-driven beam actuators.

Two-Dimensional Optical Scanning of A Piezoelectric Cantilever Actuator

Large-angle and ultra-cold scanner

A Two-Dimensional Micro Scanner Integrated With A Piezoelectric Actuator And Piezoresistors

Laser Doppler vibration analysis of miniaturized piezoelectric scanning structure

Simulation of SiO2-based Piezoresistive Microcantilevers

Design and Analysis of a Piezo-Actuated Flexure-Based Scanning System in ECDLs

Design of two-dimensional piezoelectric laser scanner system for precision laser beam steering

Two-Dimensional Scanning Realized By An Asymmetry Fiber Cantilever Driven By Single Piezo Bender Actuator For Optical Coherence Tomography

Design And Optimization Of Micro Scanner Driven By Folded Piezoelectric Unimorph Actuators Using Pzt Films

A Silicon-based Scanning Micromirror Actuated by Piezoelectric Cantilevers Using PZT

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

Study of piezo-induced surface vibration in solids using atomic force probe

Novel Piezoelectric Actuation Mechanism for a Gimbal-Less Mirror in 2D Raster Scanning Applications

3.8×3.8 mm2 Tiny Piezoelectric Resonant MEMS Scanner Using Fork-Shaped and Ring-Shaped Actuators

Development of Two Dimensional Scanning Fiber Probe Excited by Single Actuator

Compound Three-dimensional Piezoelectric Scanner Used in Scanning Probe Microscopy

3.8×3.8 mm2 compact piezoelectric resonant MEMS scanner using fork-shaped and ring-shaped actuators

Wide Two-Degree-of-Freedom Static Laser Scanner with Miniaturized Transmission Mechanism and Piezoelectric Actuation

Piezoresistor Design For Deflection Angles Decoupling Measurement Of Two-Dimensional Moems Scanning Mirror

Miniaturized 2D Scanning Microscopy with a Single 1D Actuation for Multi-Beam Optical Coherence Tomography

Design of a Bi-Axial Piezoelectric MEMS Scanner with Tri-Gimbal Structure for Scanning Pattern Enhancement