Body temperature, thermoregulatory behaviour and pelt characteristics of three colour morphs of springbok (Antidorcas marsupialis).

Robyn S. Hetem,B. A. de Witt,L. Fick,A. Fuller,G. Kerley,Leith C. R. Meyer,D. Mitchell,S. Maloney

DOI: https://doi.org/10.1016/j.cbpa.2008.11.011

2009-03-01

Comparative biochemistry and physiology. Part A, Molecular & integrative physiology

Abstract:

What problem does this paper attempt to address?

A Compact and High-Precision Method for Active Beam Stabilization System

Chenliang Ding,Dazhao Zhu,Zhen Wei,Mengbo Tang,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2021.127328

IF: 2.4

2021-01-01

Optics Communications

Abstract:An active beam stabilization system with high-precision correction and fast response with a small size is developed. By completely separating the correction of positional (x, y) and angular (alpha, beta) deviations, this system avoids the coupling effect which increases the errors caused by the nonlinear, hysteresis, and creep characteristics of the piezoelectric actuators in conventional dual fast steering mirrors (FSMs) control system. And a combination of lenses is designed to achieve a large focal length in a small space, which is advantageous for high-precision and strong anti-interference ability. The experimental results show that the peak and valley (PV) values of the positional and angular deviations over 60 min are smaller than 0.58 gm and 1.07 grad which are less than 8% of the deviations without control, the standard deviation (STD) values are smaller than 0.07 gm and 0.09 grad. The regulating time is reduced to 38 ms. Moreover, the results from a series of experiments show that the STD values of the deviations over 10 h are smaller than 0.09 gm and 0.13 grad. Thus, the proposed system is effective for many laser applications, especially those involving high-precision optical systems.
Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

Chenliang Ding,Dazhao Zhu,Chengpeng Ma,Mengbo Tang,Zhenyao Yang,Yong Liu,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.3788/col202321.031201

IF: 2.56

2023-01-01

Chinese Optics Letters

Abstract:We propose a new method for the development of multi-beam systems for the spatial alignment and stability of beams based on the error separation technique. This method avoids alignment errors caused by coupling effect of piezoelectric devices, inaccurate correction calculations, and detection mode of the angular deviation. According to the results by external detectors, the error value of spatial alignment and the root mean square [RMS) of deviations under control during 1 h can be equivalent to approximately 0.87 and 1.06 nm at the sample plane under an oil immersion lens [focal length f = 2 mm). The RMS of deviations is less than one-third of those currently reported for multi-beam systems; therefore, higher alignment and stability accuracy can be achieved with our proposed method.
A Two-Dimensional Micro Scanner Integrated With A Piezoelectric Actuator And Piezoresistors

Chi Zhang,Gaofei Zhang,Zheng You

DOI: https://doi.org/10.3390/s90100631

IF: 3.9

2009-01-01

Sensors

Abstract:A compact two-dimensional micro scanner with small volume, large deflection angles and high frequency is presented and the two-dimensional laser scanning is achieved by specular reflection. To achieve large deflection angles, the micro scanner excited by a piezoelectric actuator operates in the resonance mode. The scanning frequencies and the maximum scanning angles of the two degrees of freedom are analyzed by modeling and simulation of the structure. For the deflection angle measurement, piezoresistors are integrated in the micro scanner. The appropriate directions and crystal orientations of the piezoresistors are designed to obtain the large piezoresistive coefficients for the high sensitivities. Wheatstone bridges are used to measure the deflection angles of each direction independently and precisely. The scanner is fabricated and packaged with the piezoelectric actuator and the piezoresistors detection circuits in a size of 28 mm x 20 mm x 18 mm. The experiment shows that the two scanning frequencies are 216.8 Hz and 464.8 Hz, respectively. By an actuation displacement of 10 mu m, the scanning range of the two-dimensional micro scanner is above 26 degrees x 23 degrees. The deflection angle measurement sensitivities for two directions are 59 mV/deg and 30 mV/deg, respectively.
Wide Two-Degree-of-Freedom Static Laser Scanner with Miniaturized Transmission Mechanism and Piezoelectric Actuation

Takashi Ozaki,Norikazu Ohta,Motohiro Fujiyoshi

DOI: https://doi.org/10.3390/s21186077

IF: 3.9

2021-09-10

Sensors

Abstract:In recent years, laser scanners have attracted significant attention for applications such as laser radars. However, the establishment of a two-degree-of-freedom scanner that can quasi-statically drive a large mirror with a large deflection angle has proven to be challenging. In this paper, we propose a laser scanner design and fabrication method by combining two unimorph piezoelectric actuators composed of piezoelectric single-crystal Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 and a miniature translation-rotation conversion mechanism with flexible polyimide hinges. The size of the entire scanner was 32 mm × 12 mm × 10 mm. We successfully demonstrated that the scanner could achieve a large quasi-static mechanical deflection angle amplitude of 20.5° in two axes with a 6-mm-square mirror.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Design and experiment of a 2 DOF laser scanner and deflection angle measurement system

程继伟,巩马理,刘兴占,贾维溥,闫平,张海涛

DOI: https://doi.org/10.3321/j.issn:1002-1582.2003.02.010

2003-01-01

Guangxue Jishu/Optical Technique

Abstract:The principle and structure design of a 2 DOF tip/tilt laser scanner is introduced, and two different methods to measure the 2 DOF deflection angle are compared. The aspects of the measurement system using PSD are discussed, including its basic principle, optical system and signal processing circuit. The system now can reach a side scanning range of 30° with resolution of 0.01°.
Design of 3D Laser Radar Based on Laser Triangulation

Yang,Yuchen Zhang,Yuehai Wang,Danian Liu

DOI: https://doi.org/10.3837/tiis.2019.05.010

2019-01-01

KSII Transactions on Internet and Information Systems

Abstract:The aim of this paper is to design a 3D laser radar prototype based on laser triangulation. The mathematical model of distance sensitivity is deduced; a pixel-distance conversion formula is discussed and used to complete 3D scanning. The center position extraction algorithm of the spot is proposed, and the error of the linear laser, camera distortion and installation are corrected by using the proposed weighted average algorithm. Finally, the three-dimensional analytic computational algorithm is given to transform the measured distance into point cloud data. The experimental results show that this 3D laser radar can accomplish the 3D object scanning and the environment 3D reconstruction task. In addition, the experiment result proves that the product of the camera focal length and the baseline length is the key factor to influence measurement accuracy.
Design and Analysis of a Piezo-Actuated Flexure-Based Scanning System in ECDLs

Meng Zhang,Zhigang Liu,Yu Zhu,Xin Zhang

DOI: https://doi.org/10.1088/1361-665x/ab3542

IF: 4.1

2019-01-01

Smart Materials and Structures

Abstract:The principles and structure of the external cavity diode laser (ECDL) without antireflection coating have been analyzed. The core part of an ECDL is an optical resonator, which is essentially a piezoelectric-based scanning system. This paper presents a novel scanning system that is based on an optimized star flexible hinge to improve the tracking performance and the rotation accuracy of these systems. The motion differential equation and the vibration equation of the piezo-based scanning system are derived using a Lagrangian equation and a Duhamel integral, respectively. Static, kinematic and dynamic models of the scanning system are established and analyzed. The critical dimensional parameters of the system have been calculated and optimized by considering the main parameters. The flexible structure was fabricated using the wire electrical discharge machining technique and heat treatment was performed to improve its mechanical properties. A test platform was built and experiments were then conducted to investigate the system performance. The results show that output displacement of the systems is 15.68 μm corresponding to a 75 V voltage triangle signal. The natural frequency of the system is 2187 Hz. The tuning performance of the ECDL was also tested.
A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

Wu-Le Zhu,Zhiwei Zhu,Yi Shi,Xiangfan Chen,Yu He,Kornel F. Ehmann,Bing-Feng Ju

DOI: https://doi.org/10.1063/1.4965880

IF: 1.6

2016-01-01

Review of Scientific Instruments

Abstract:This article presents a novel two-degrees-of-freedom (2-DoF) piezo-actuated parallel-kinematic micro/nano-positioning stage with multi-level amplification. The mirror symmetric stage consists of four leverage mechanisms, two Scott-Russell mechanisms, and a Z-shaped flexure hinge (ZFH) mechanism. Taking advantage of the ZFH mechanism, 2-DoF motions with final-level flexural amplification and decoupled motion guidance are achieved. Analytical models of the stage are developed and validated through finite element analysis to characterize its working performance. Practical testing of a prototype stage is conducted to demonstrate the design process and to quantify its response characteristics. Due to the utilized multi-level amplification, a practical amplification ratio of 13.0 is realized by the prototype. The decoupled output motion guidance feature of the stage makes it amenable for implementation in raster scanning type of measurements.
Comparison and Design of Two Different Deflection Angle Measurement System for a 2 DOF Laser Scanner

程继伟,巩马理,刘兴占,贾维溥,闫平,黄磊

DOI: https://doi.org/10.3969/j.issn.1001-5078.2002.04.008

2002-01-01

Abstract:The principle and structure design of a 2 DOF tip/tilt laser scanner is introduced and two different methods to measure the 2 DOF deflection angle are compared.The aspects of the measurement system using PSD are discussed,including its basic principle,optical system and signal processing circuit.The system now can reach a wide scanning range of 30° with resolution of 0.01°.
Design and Control of a Novel 3-D Piezoelectric Scanning Coaxial Optical Microscope System

Jim-Wei Wu,Shao-An Chao,Ting-Kuei Hsu

DOI: https://doi.org/10.1109/tim.2023.3253879

IF: 5.6

2023-04-01

IEEE Transactions on Instrumentation and Measurement

Abstract:This article presents a novel 3-D optical measurement system combining an optical microscope (OM) and a -axis piezoelectric scanner. The proposed system includes an advanced controller for the piezoelectric scanner and an algorithm to process OM imaging data. The -axis piezoelectric scanner uses a back-propagation neural network (BPNN) to control the upward movement of the sample in a stepwise manner. At the point where each step induces a small steady-state error, the OM captures an image in that position. Each 2-D OM image undergoes denoising via connected-component labeling (CCL) before being converted into 3-D data via image processing. The layered images are then stacked in a 3-D arrangement to construct an accurate 3-D image of the sample.

engineering, electrical & electronic,instruments & instrumentation
A Hybrid Solid-State Beam Scanner for LiDAR Applications

Zhaoyang Zhang,Qikai Huang,Tingge Dai,Bei Chen,Qiang Zhang,Hui Yu,Yuehai Wang,Jianyi Yang

DOI: https://doi.org/10.1117/12.2642858

2023-01-01

Abstract:We demonstrate a hybrid solid-state beam scanner based on 32-channel silicon nitride optical switch with the assistance of transmission blazed grating. The optical switch exhibits rather low power consumption of 7.2 mW/π. Besides, end-fire antennas offer high optical efficiency with less reflection. Non-mechanical two-dimensional beam steering with range of 14.32° × 9.94° and beam divergence of <0.1° is achieved by wavelength tuning and onchip optical path switching. The proposed system eliminates complex control and time-consuming array phase calibration, providing a flexible, scalable and effective solution for all solid-state coaxial light detection and ranging (LiDAR) technology.
Two-Dimensional Optical Scanning of A Piezoelectric Cantilever Actuator

Xiangcheng Chu,Long Ma,Songmei Yuan,Mengkai Li,Longtu Li

DOI: https://doi.org/10.1007/s10832-007-9292-2

2007-01-01

Journal of Electroceramics

Abstract:A piezoelectric optical scanning cantilever structure with two-dimensional scanning angles was reported. The theoretical and experimental studies on the structure were carried out. By using finite element method, the effect of the materials and the structure size on the theoretical results were concluded, and a favorable two-dimensional piezoelectric optical scanning structure with a single cantilever was obtained. A two-dimensional piezoelectric optical scanning specimen was fabricated. It was found that a 0.282° bending scanning angle at 1056 Hz and a 0.12° torsional scanning angle at 4612 Hz were obtained under the forcing voltage of 5 V (o–p).
Ultrafast and High-Precision Steering of Laser Beams: Using a Synchronized Scanning System with Frequency Domain Feedforward Tuning

Kuai Yang,Xuexuan Li,Zhen Zhang

DOI: https://doi.org/10.1109/mesa61532.2024.10704826

2024-01-01

Abstract:Beam steering plays a pivotal role in laser manufacturing, where the deflection range, response time, and precision of beam steering significantly affect the scale, throughput, and quality of manufacturing. Recent advancements in beam steering focus on integrating galvanometer scanners with acousto-optic deflectors (AODs), thereby achieving both large deflection angles and ultrafast response time. To further enhance steering precision, it is effective to utilize AODs for correcting the errors of galvanometer scanners in real-time. Nevertheless, a challenge arises in keeping tracking error of galvanometers within the deflection range of AODs across general high-speed trajectories. To tackle this challenge, this paper proposes a frequency domain iterative feedforward tuning method aimed at enhancing the general tracking precision of galvanometers. Furthermore, a synchronized scanning system, where AODs could effectively reduce tracking error of galvanometers, is implemented with the proposed method. Experimental results validate that the proposed control method exhibits superior extrapolation capability compared to the existing feedforward tuning approach across various trajectories characterized by significant differences in spectrum.
A Multi-Mode Self-Centering Piezo Actuator: Design, Analysis and Its Application in Full-Stroke Microscopic Imaging

Guangda Qiao,Ziyue Zhang,Guofang Gong,Huayong Yang,Dong Han

DOI: https://doi.org/10.1016/j.ymssp.2024.111963

IF: 8.4

2025-01-01

Mechanical Systems and Signal Processing

Abstract:Parasitic piezo dive is a primary method for cross-scale positioning, which can adjust the locking force appropriately to increase the service life but bring radial fluctuations, backward motion, and bi-directional inconsistency issues. In this work, a multi-mode self-centering piezo actuator is proposed, a theoretical analysis model of the transmission mechanism is established, and parameterized design is conducted using the finite element method. The actuator features normal pressure adjustment, parallel drive, parasitic drive, and rectangular drive modes. Under the first mode, a bias voltage of 50 Vp-p achieved a locking force adjustment of 2.5 N. Furthermore, the characteristics of the remaining modes were compared. It was observed that the parallel trajectory drive mode exhibited a higher velocity of 31.68 mm/s, while the rectangular trajectory drive mode suppressed the backward motion to achieve smooth driving, with a linear correlation coefficient R-2 of the displacement reaching 0.9999. Compared to the traditional parasitic actuator, the radial fluctuations in these two drive modes were reduced by up to 98.4 %, and the bidirectional consistency were improved to 97 %. Finally, we completed convenient imaging of various specimens across the full-stroke of microscopes by integrated circuit design and Bluetooth communication on mobile phones.
System Integration Design of High-Performance Piezo-Actuated Fast-Steering Mirror for Laser Beam Steering System

Jung-Gon Kim

DOI: https://doi.org/10.3390/s24216775

IF: 3.9

2024-10-22

Sensors

Abstract:This paper presents an innovative piezo-actuated fast-steering mirror (FSM) that integrates control design and system operation to improve the tracking performance of laser beam steering (LBS) systems. The proposed piezoelectric FSM is centered on two pairs of stacked actuators functioning in the tip-tilt direction via novel flexible hinges with strain-gauge sensors for position measurement. The suggested flexible hinge scheme allows the first fundamental resonance mode with the optical mirror to exceed 400 Hz while achieving an actuation range of ±5 mrad. Thus, the design offers a wider mechanical actuation range than conventional piezoelectric FSMs. Moreover, LBS systems that use fast-steering motion controllers should be robust against dynamic disturbances, such as periodic external vibrations. Such disturbances, inherently associated with the operating conditions for LBS systems, typically reduce the stability of the tip-tilt motion. To attenuate the effects of such disturbances, a high-precision control system is necessary for the tip-tilt motion. Therefore, a control method integrating a proportional–integral controller with an adaptive feedforward control (AFC) algorithm is outlined to enhance tip-tilt tracking performance during high-speed scanning, compared with conventional LBS systems. Based on experimental findings, the AFC algorithm boosted control performance under dynamic disturbances, such as sinusoidal vibrations with multiple frequencies.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Design of Laser-Synchronized Scanning System for Linear Array LiDAR

Lue SHEN,Yuanqing WANG,Fan XU

DOI: https://doi.org/10.3969/j.issn.1005-9490.2016.03.019

2016-01-01

Abstract:Aiming at dynamic scanning for linear array LiDAR,a new method was proposed to scan 3D target in which signal from PIN diode was transformed to drive a turntable. Hardware involved in this system was introduced while level-translator circuit was designed.Besides,how the laser-synchronized system works was summarized. Ex?periment shows that it is compact and runs fluently in circle with an accuracy up to 0.000 312 5.
Can in-vitro chemoresponse assays help find new treatment regimens for malignant gliomas?

U. Linz,B. Ulus,G. Neuloh,H. Clusmann,M. Oertel,K. Nolte,J. Weis,N. Heussen,J. Gilsbach

DOI: https://doi.org/10.1097/CAD.0000000000000062

2014-04-01

Anti-Cancer Drugs

Abstract:Various in-vitro chemosensitivity and resistance assays (CSRAs) have been demonstrated to be helpful decision aids for non-neurological tumors. Here, we evaluated the performance characteristics of two CSRAs for glioblastoma (GB) cells. The chemoresponse of fresh GB cells from 30 patients was studied in vitro using the ATP tumor chemoresponse assay and the chemotherapy resistance assay (CTR-Test). Both assay platforms provided comparable results. Of seven different chemotherapeutic drugs and drug combinations tested in vitro, treosulfan plus cytarabine (TARA) was the most effective, followed by nimustine (ACNU) plus teniposide (VM26) and temozolomide (TMZ). Whereas ACNU/VM26 and TMZ have proven their clinical value for malignant gliomas in large randomized studies, TARA has not been successful in newly diagnosed gliomas. This seeming discrepancy between in vitro and clinical result might be explained by the pharmacological behavior of treosulfan. Our results show reasonable agreement between two cell-based CSRAs. They appear to confirm the clinical effectiveness of drugs used in GB treatment as long as pharmacological preconditions such as overcoming the blood–brain barrier are properly considered.
A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Guangda Qiao,Fang Lu,Guofang Gong,Huayong Yang,Dong Han

DOI: https://doi.org/10.1109/tie.2023.3292876

IF: 7.7

2024-01-01

IEEE Transactions on Industrial Electronics

Abstract:The piezoelectric inertial actuator is one of the critical technologies for precision equipment. However, its inherent working mode makes it difficult to achieve smooth motion, further limiting broad commercialization. This work presents a gravity-assisted piezoelectric inertial actuator that can achieve bidirectional smooth drives by a single excitation source and improve bidirectional consistency in vertical assembly by actively leveraging the contact behaviors of the piezoelectric stack and flexure mechanism. Specifically, the strategy is to balance the forward displacement surge and the reverse backward motion using assisted gravity combined with the locking force regulation of the stator's parasitic motion. The operating process is clarified by kinetic modeling, the parametric design of the structure is completed by the finite element method, and experimental studies verify the concept's feasibility. Bidirectional displacement linear fitting correlation coefficients R-2 reach 0.9999 assisted by gravity, even at the dead weight of a moving object equivalent to a load thrust of 1.35 N (more than 3.3 times the current work). The maximum velocity and resolution achieve 304.73 mm/s and 5.3 nm, respectively. This novel design idea is especially suitable for the Z degree-of-freedom drive, which has been successfully applied to microscopic imaging.
Piezoelectric-based large-angle stroke fast steering mirror with high ratio of output range to resolution and self-sensing capability

Wenwen Han,Chongpu Zhai,Shubao Shao,Zheng Tian,Qian Lu,Shuwen Zhang,Minglong Xu

DOI: https://doi.org/10.1063/5.0205242

2024-08-01

Abstract:In space optical applications, the piezoelectric-actuated fast steering mirror (FSM) is one of the pivotal components for high-precision beam capturing and trajectory tracking. The FSM is restrained in small-angle scanning applications due to the short actuation stroke of the incorporated piezoelectric materials. This study introduces a dual-axis sub-radian stroke FSM with a high ratio of output range to resolution and self-sensing capability, based on cascading structures for displacement amplification and flexible parts for feedback. Theoretical analyses and finite element analysis (FEA) are applied to elucidate the driving and deformation mechanisms of the proposed FSM structure. To ensure the performance of the proposed FSM, the double-loop control strategies are implemented independently for rotation around the two orthogonal axes. Experimental results reveal that both axes can rotate 148.67 mrad under the closed-loop control, with the ratio of output range to resolution larger than 3.90 × 104, superior to existing FSMs. We further demonstrate with designed experiments of tracking complex trajectories that the relative tracking accuracy error remains lower than 0.02%.

Body temperature, thermoregulatory behaviour and pelt characteristics of three colour morphs of springbok (Antidorcas marsupialis).

A Compact and High-Precision Method for Active Beam Stabilization System

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

A Two-Dimensional Micro Scanner Integrated With A Piezoelectric Actuator And Piezoresistors

Wide Two-Degree-of-Freedom Static Laser Scanner with Miniaturized Transmission Mechanism and Piezoelectric Actuation

Design and experiment of a 2 DOF laser scanner and deflection angle measurement system

Design of 3D Laser Radar Based on Laser Triangulation

Design and Analysis of a Piezo-Actuated Flexure-Based Scanning System in ECDLs

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

Comparison and Design of Two Different Deflection Angle Measurement System for a 2 DOF Laser Scanner

Design and Control of a Novel 3-D Piezoelectric Scanning Coaxial Optical Microscope System

A Hybrid Solid-State Beam Scanner for LiDAR Applications

Two-Dimensional Optical Scanning of A Piezoelectric Cantilever Actuator

Ultrafast and High-Precision Steering of Laser Beams: Using a Synchronized Scanning System with Frequency Domain Feedforward Tuning

A Multi-Mode Self-Centering Piezo Actuator: Design, Analysis and Its Application in Full-Stroke Microscopic Imaging

System Integration Design of High-Performance Piezo-Actuated Fast-Steering Mirror for Laser Beam Steering System

Design of Laser-Synchronized Scanning System for Linear Array LiDAR

Can in-vitro chemoresponse assays help find new treatment regimens for malignant gliomas?

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Piezoelectric-based large-angle stroke fast steering mirror with high ratio of output range to resolution and self-sensing capability