Abstract:The laser alignment technique is widely used in the measurement of straightness due to its unique capabilities of non-contact detection, fast response and high accuracy. By coupling the laser beam into a single-mode fiber, traditional alignment method can be greatly improved, since the emitting beam from the fiber basically won’t be affected by the variation of the incident intensity distribution. However, such method still suffers from errors caused by the vibration of the emitting fiber end and air turbulence. In this paper, the traditional alignment reference, which is the centroid of the intensity distribution, is replaced by center of the dark spot in a diffraction pattern, by adding a spiral phase plate (SPP) into the optical path. The center of the dark spot is proved to be stationary when the laser beam drifts. The far-field diffraction model of SPP is theoretically analyzed in detail. In the calibration experiments, the detected position data of the scanned CCD is highly linear with a correlation coefficient of 0.99999. The system is guaranteed with outstanding stability by a series of experiments, in which the standard deviation of the x and y coordinates are respectively only 7.0% and 33.7% in short-term tests and 20.3% and 25.3% in long-term tests. With simple configuration, the proposed system demonstrates satisfying performance in laser alignment.

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

Method for enhancing stability in multi-beam microscopy

A Compact and High-Precision Method for Active Beam Stabilization System

High-precision laser alignment technique based on spiral phase plate

Stabilization of Laser Beam Position Based on a Closed-Loop Fast Steering Mirror System

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Laser Collimation Method Based on Differential Compensating Beam Drift

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Multi-position calibration method for laser beam based on cyclicity of harmonic turntable

Double Laser Beam Phase Modulating Alignment Method

A Novel Method for Measuring, Collimating and Maintaining the Spatial Pose of Terminal Beam in Laser Processing System Based on 3D and 2D Hybrid Vision

Compensation Of Laser Beam Directional Stability Offset Error By Using Translational Spectroscope

Stability research of laser confocal probe for measuring the micro-shpere

High-accuracy calibration for multi-laser powder bed fusion via in situ detection and parameter identification

An Automatic Beam Alignment System Based On Relative Reference Points For Thomson Scattering Diagnosis System

Design and development of measuring device for beam pointing and positional errors in multi-axes laser interferometric systems

Analysis of the Beam-Pointing Stability in the High Power Laser System

Beam Alignment Based on the Imaging Properties of the Spatial Filter by Controlling the Deformable Mirror in a High Power Laser

Numerical Study on Beam-based Alignment of SXFEL Undulator Lattice