Abstract:The laser autocollimation measurement method is an important technique for the precise measurement of small angles. However, the beam drift significantly affects the accuracy and stability of laser autocollimation. This article is the first to present a laser-fiber autocollimation method for measuring small angles with the difference in common-path polarized light. In principle, this method greatly reduces the laser beam drift caused by various factors and significantly improves the measurement accuracy and stability. The effects of the factors affecting beam drift on small-angle measurement were analyzed and simulated. A corresponding measurement system was developed with the capability to measure not only small angular changes in a single object but also relatively small angular changes between two objects, and a series of experiments were conducted. The results indicated that the angle measurement stability was improved by 90%–98% using the difference in common-path polarized light to compensate the beam drift caused by mechanical structure drift, vibration, and environmental disturbance. Extremely high measurement stability of 0.07 in 10 h and $0.04''$ in 2 h was obtained at 500 mm. Furthermore, the measurement system was effectively used to measure the thermal stability of a star sensor bracket of a satellite, yielding a thermal stability of $0.15''/^{circ } ext{C}$ to meet the on-orbit operational stability requirement of $0.25''/^{circ } ext{C}$ . Thus, this new method compensates for beam drift in the autocollimation measurement of small-angle changes in a single object and relatively small angular changes between two objects.

Laser Collimation Method Based on Differential Compensating Beam Drift

Measuring Straightness Method with Common Path Compensation for Laser Drift

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

High-precision laser alignment technique based on spiral phase plate

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Roll angle measurement based on common path compensation principle

Stabilization of Laser Beam Position Based on a Closed-Loop Fast Steering Mirror System

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Present Status of High Precision Laser Displacement Sensor Based on Triangulation

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

A Novel Method to Simultaneously Measure the Straightness

Laser autocollimation based on an optical frequency comb for absolute angular position measurement

High-precision Small-angle Measurement of Laser-fiber Autocollimation Using Common-path Polarized-light Difference

Calibration of Laser Beam-Direction for Point Laser Sensors

Beam Drift Reduction by Straightness Measurement Based on a Digital Optical Phase Conjugation

Small-angle measurement in laser autocollimation based on a common-path compensation method

A Novel Method for Measuring, Collimating and Maintaining the Spatial Pose of Terminal Beam in Laser Processing System Based on 3D and 2D Hybrid Vision

Wide-beam collimating method with double LD modulation

Laser pointing error analysis and compensation method of low-power laser diode source applied to triangulation ranging system