Abstract:Liquid metal coolants have a significant role in the design of advanced fusion reactors. There is a need for an investigation of the thermal behavior of the liquid metal in working reactor environment, such as when fluid flow at low Prandtl number (Pr) with a buoyancy effect, is subjected to a magnetic field. In the present study, a direct numerical simulation (DNS) for a low Pr number fluid flow resulting in turbulent heat transfer with buoyancy effect under a magnetic field has been carried out between two vertical plates kept at different temperatures. In this simulation, the values of the Hartmann number (Ha) were 0 and 6, Pr number was 0.06 and Grashof numbers were 6.4 x 10(5), 9.6 x 10(5), and 1.6 x 10(6). The turbulent quantities of the parameters such as the mean temperature, turbulent heat flux, and temperature variance were obtained by direct numerical simulation (DNS). The Reynolds number (Re) for channel flow based on friction velocity averaged by both walls, viscosity, and channel half-width was set to be constant as Re-tau* = 150. A uniform magnetic field was applied in a direction perpendicular to the walls of the channel. The profiles of mean velocity and velocity fluctuations became asymmetric, and the tendency was enhanced with the increasing buoyancy effect. However, by the application of a magnetic field the tendency decreased. In other words, thermal transport between the walls became weak due to the magnetic effect. (C) 2012 Elsevier B.V. All rights reserved.

Thermal Mixing Test Of Coolant In The Core Bottom Structure Of A High-Temperature Engineering Test Reactor

Numerical and Experimental Studies for Thermal Mixing of Coolant in a Core Bottom Structure of HTTR.

Thermal Mixing of Coolant Flows in a High-Temperature Gas-Cooled Reactor Core (1st Report, Two-jet Mixing Experiments in a Cavity of a Plenum Block)

Thermal mixing performance of the coolant channel in core bottom of the HTR-10

Numerical Investigations of Thermal Mixing Performance of a Hot Gas Mixing Structure in High-Temperature Gas-Cooled Reactor

Model Tests of Coolant Thermal Mixing in the HTR-10 Hot Gas Plenum

Mechanism and experimental study of thermal mixing of fluid with different temperature

Thermal Mixing Performance of Mixing Structure at Reactor Outlet of HTR-PM under Complex Conditions

Analysis and Experimental Results on Ingress of Coolant Event in Vacuum Vessel

Experimental Observations of Thermal Mixing Characteristics in T-Junction Piping

Thermal mixing similarities for the hot gas plenum of the 10 mw high temperature gas cooled reactor

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Turbulent Heat Transfer for Coolant Water Flow in Plasma Facing Component

Thermofluid experiments on ingress of coolant event

Study on Thermal Mixing of Liquid–metal Free-Surface Flow by Obstacles Installed at the Bottom of a Channel

Thermal mixing enhancement of liquid metal film-flow by various obstacles under vertical magnetic field

Direct numerical simulation of turbulent mixed convection in a vertical channel in a wall-normal magnetic field

Comparative tests of mixing performance of hot gas plenum with different thermal mixing element in 10MW HTR test module

Method and Validation for Measurement of Effective Thermal Diffusivity and Conductivity of Pebble Bed in High Temperature Gas-cooled Reactors

Similarity Analysis for Hot Gas Mixing Experiment of Outlet of HTR-PM Reactor Core

Experiment Study on Thermal Mixing Performance of HTR-PM Reactor Outlet