Abstract:When hot and cold fluids are mixed at pipeline tees, temperature fluctuations are generated and can lead to thermal fatigue damage in the piping materials. At the University of Stuttgart in Germany, experimental investigations have been performed for understanding the flow mixing mechanism causing thermal fatigue. It was found that the inlet flow rate is one of the decisive factors on the mixing behaviors at a horizontal T-junction. In this study, the influence of the inlet flow rate on the flow mixing behaviors at the vertical T-junction is investigated using the large-eddy simulation (LES) method. The simulations are validated with the previous experiments and provide a good overview of the mixing flow. The LES method shows the advantage of illustrating the collision of two flow streams at the T-junction, which leads to different behaviors of the mixing flow. Generally, the temperature fluctuation in the mixing flow as well as the stability of thermal stratification decreases along the flow direction due to the dissipation of the turbulent kinetic energy in the mixing flow. The decrease in the main flow rate shows the impact of the increase in thermal stratification stability and the reverse flow distance. The decrease in the branch flow leads to a slight increase of the thermal stratification stability downstream of the T-junction and significant turbulent penetration in the branch pipe. The maximum temperature fluctuation at the pipeline inner surface is located at the joint position of the pipelines with a value higher than 30 K. Moreover, the flow collision at the T-junction leads to significant secondary flow in the mixing region, which can be influenced by the variations in the inlet flow rate. In particular, the secondary flow due to cold fluid presents a phenomenon of counter-rotating vortex pair (CRVP), and generates a temperature fluctuation with a frequency of approximately 1.1 Hz, which is recorded by the monitor points at both horizontal sides of the pipeline. In comparison with the previous work at the horizontal T-junction, the complete flow collision at the vertical T-junction is the reason for the totally different mixing phenomenon.

Experimental Observations of Thermal Mixing Characteristics in T-Junction Piping

Investigating Thermal Mixing and Reverse Flow Characteristics in A T-Junction by Way of Experiments

Numerical and Experimental Investigation of Mixing Characteristics in the Constructal Tree-Shaped Microchannel

Experimentally Investigating the Thermal Mixing and Thermal Stripping Characteristics in A T-Junction

Mixing at Double-Tee Junctions with Unequal Pipe Sizes in Water Distribution Systems

Experimental Study of Solute Mixing at Double-Tee Junctions in Water Distribution Systems

Experimental Testing and Modeling Analysis of Solute Mixing at Water Distribution Pipe Junctions.

Numerical investigation of thermal-mixing characteristics at vertically oriented T-junction pipelines

Investigating Thermal Mixing and Reverse Flow Characteristics in a T-junction Using CFD Methodology

Thermal Mixing Test Of Coolant In The Core Bottom Structure Of A High-Temperature Engineering Test Reactor

Mixing at Cross Joints with Different Pipe Sizes in Water Distribution Systems

Mechanism and experimental study of thermal mixing of fluid with different temperature

Experimentally Determined Solute Mixing under Laminar and Transitional Flows at Junctions in Water Distribution Systems

Investigating Effects of Injection Angles and Velocity Ratios on Thermal-Hydraulic Behavior and Thermal Striping in a T-junction

Numerical and Experimental Studies for Thermal Mixing of Coolant in a Core Bottom Structure of HTTR.

Analysis of Fluid Flow Characteristic with Different Temperature and Different Methods in T-junction Pipe

Large Eddy Simulation of Hot and Cold Fluids Mixing in A T-Junction for Predicting Thermal Fluctuations

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Experimental study on the flow mixing in T-junctions with an impeller

Numerical Investigations of Thermal Mixing Performance of a Hot Gas Mixing Structure in High-Temperature Gas-Cooled Reactor

CFD simulation on the transient process of coolant mixing phenomenon in reactor pressure vessel