Abstract:This study aims to advance understanding and visualization of the passive flow inside the core channels of a dual-channel plenum-to-plenum test facility designed as representative geometry of nuclear prismatic modular reactors core. Simultaneous experimental measurements of local surface and coolant fluid temperatures and flow fields in addition to local heat transfer coefficients were provided by integrating sophisticated flow dynamics and heat transfer techniques at different axial locations (Z/L=0.04,0.28,0.41,0.59,0.77,0.96) along the facility heated channel. Results emphasize the significant dependency of thermal and flow fields, of naturally driven gas, on heating intensity and configuration. Interestingly, although the entire length of the channel is subjected to heating, an inflection in surface and gas temperature in addition to changes in velocity distribution were observed through the top section of the heated channel. This highlights the significance of the complexity of the facility which causes severe interactions, and potential recirculation and back mixing, between rising hot gas with the cold gas in the upper plenum. This is validated by the negative heat flux measurements collected at the top section of the channel indicating heat reversal where heat is transferred from air to the channel. Moreover, densitometric Froude number for different heating profiles were estimated and found to range from 0.66 to 0.75 indicating the existence of a jet flow at the hot channel outlet. The obtained results provide valuable benchmark data for validating further investigations by computational fluid dynamics (CFD) and to perform further investigations of thermal hydraulics in prismatic block reactors.

Thermal Mixing of Coolant Flows in a High-Temperature Gas-Cooled Reactor Core (1st Report, Two-jet Mixing Experiments in a Cavity of a Plenum Block)

Thermal Mixing Test Of Coolant In The Core Bottom Structure Of A High-Temperature Engineering Test Reactor

Numerical and Experimental Studies for Thermal Mixing of Coolant in a Core Bottom Structure of HTTR.

Numerical Investigations of Thermal Mixing Performance of a Hot Gas Mixing Structure in High-Temperature Gas-Cooled Reactor

Thermal mixing similarities for the hot gas plenum of the 10 mw high temperature gas cooled reactor

Model Tests of Coolant Thermal Mixing in the HTR-10 Hot Gas Plenum

Thermal mixing enhancement of liquid metal film-flow by various obstacles under vertical magnetic field

Mechanism and experimental study of thermal mixing of fluid with different temperature

Thermal Mixing Enhancement of Liquid Metal MHD Free-Surface Flow by Optimizing Vortex Generator Arrays

Numerical Simulation of Flow Field in Hot Gas Chamber of High-Temperature Gas-Cooled Reactor

Thermal mixing performance of the coolant channel in core bottom of the HTR-10

Comparative tests of mixing performance of hot gas plenum with different thermal mixing element in 10MW HTR test module

Investigation of the Flow and Temperature Uniformity in the Reactor Core of HTGR

Similarity Analysis for Hot Gas Mixing Experiment of Outlet of HTR-PM Reactor Core

Thermal Mixing Performance of Mixing Structure at Reactor Outlet of HTR-PM under Complex Conditions

Benchmark Experiments for Turbulent Mixing in the Scaled-Down Upper Plenum of High-Temperature Gas-Cooled Reactors Under Accident Scenario

Turbulent Heat Transfer for Coolant Water Flow in Plasma Facing Component

Experimental Investigation on Heat Transfer of HEMJ Type Divertor with Narrow Gap Between Nozzle and Impingement Surface

Characterizing passive flow in nuclear prismatic modular reactor core channels: Temperature, velocity, and heat transfer analysis

Experimental Study of the Pebble Distribution in the Mixing Zone of a Two-Region HTGR Reactor Core

Study on Thermal Mixing of Liquid–metal Free-Surface Flow by Obstacles Installed at the Bottom of a Channel