Abstract:Thermohydraulic analysis of postulated accidents will identify system responses to accident scenarios and aid in developing design of safety systems and strategies to prevent or mitigate accident propagation. This paper reports analyses of four accident scenarios of a fusion DEMO reactor based on water-cooled ceramic-pebble breeder blanket. The accidents analyzed, which were selected based on the previous logical accident analysis, are ex-vessel loss of coolant of the primary cooling system, in-vessel loss of coolant of the first wall (FW) cooling pipes, loss of coolant in blanket modules, and loss of vacuum. The analyses have identified thermohydraulic responses of the DEMO systems to these accidents, pressure loads to confinement barriers for radioactive materials. Effectiveness of the safety systems and the integrity of the primary and final (secondary) confinement barriers against the accidents are discussed. As for the final confinement barrier, we show for the first time that implementation of a pressure suppression system (PSS) to the cooling system vault and a vacuum breaker to the tokamak pit is effective in significantly keeping the integrity of the final confinement barrier against the ex-vessel loss-of-coolant and loss-of-vacuum accidents, respectively. As for the primary confinement barrier, we show for the first time that limitation of the number of blankets from which a helium purge gas line collects the bred tritium will be a key technical issue to prevent propagation of loss of coolant in a blanket box through the purge gas line and then suppress the pressurization of the vacuum vessel (VV). For the in-vessel loss of coolant of the FW cooling pipes, further optimization of the PSS or design solutions regarding in-vessel components and plasma control will be necessary to decrease the pressure load to the VV and ensure the integrity of the primary confinement barrier.

Thermofluid experiments on ingress of coolant event

Fundamental study of a water jet injected into a vacuum vessel of fusion reactor under the ingress of coolant event

Thermohydraulic experiments on a water jet into vacuum during ingress of coolant event in a fusion experimental reactor

Analysis and Experimental Results on Ingress of Coolant Event in Vacuum Vessel

Thermal Hydraulic Characteristics During Ingress of Coolant and Loss of Vacuum Events in Fusion Reactors

Proposal of Integrated Test Facility for in-Vessel Thermofluid Safety of Fusion Reactors

Possibility of Volume Reduction of Blowdown Tank in Fusion Reactor Safety System

Safety scenario and integrated thermofluid test

Fusion Safety Experiments in Jaeri

Fusion Safety Research and Development in JAERI

Turbulent Heat Transfer for Coolant Water Flow in Plasma Facing Component

Experimental and Numerical Studies on Heat Transfer and Fluid Flow Characteristics in A Vacuum Vessel of Fusion Reactor after the Loss-Of-Vacuum-Events Occurred

Numerical Study on Direct-Contact Condensation of Vapor in Cold Water

Progress in Thermohydraulic Analysis of Accident Scenarios of A Water-Cooled Fusion Demo Reactor

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Temperature distributions in a Tokamak vacuum vessel of fusion reactor after the loss-of-vacuum events occurred

BEHAVIOR OF VAPOR BUBBLES GENERATED ON A SINGLE HEATER ROD PARTLY CONFINED BY METALLIC WALLS IN SUBCOOLED WATER

Experiments on heat transfer of smooth and swirl tubes under one-sided heating conditions

Thermal Mixing Test Of Coolant In The Core Bottom Structure Of A High-Temperature Engineering Test Reactor

Experimental Study on Buoyancy-Driven Exchange Flows Through Breaches of a Tokamak Vacuum Vessel in a Fusion Reactor under the Loss-of-Vacuum-Event Condition

Investigation of cascade-type falling liquid-film along first wall of laser-fusion reactor