Abstract:Thermohydraulic analysis of postulated accidents will identify system responses to accident scenarios and aid in developing design of safety systems and strategies to prevent or mitigate accident propagation. This paper reports analyses of four accident scenarios of a fusion DEMO reactor based on water-cooled ceramic-pebble breeder blanket. The accidents analyzed, which were selected based on the previous logical accident analysis, are ex-vessel loss of coolant of the primary cooling system, in-vessel loss of coolant of the first wall (FW) cooling pipes, loss of coolant in blanket modules, and loss of vacuum. The analyses have identified thermohydraulic responses of the DEMO systems to these accidents, pressure loads to confinement barriers for radioactive materials. Effectiveness of the safety systems and the integrity of the primary and final (secondary) confinement barriers against the accidents are discussed. As for the final confinement barrier, we show for the first time that implementation of a pressure suppression system (PSS) to the cooling system vault and a vacuum breaker to the tokamak pit is effective in significantly keeping the integrity of the final confinement barrier against the ex-vessel loss-of-coolant and loss-of-vacuum accidents, respectively. As for the primary confinement barrier, we show for the first time that limitation of the number of blankets from which a helium purge gas line collects the bred tritium will be a key technical issue to prevent propagation of loss of coolant in a blanket box through the purge gas line and then suppress the pressurization of the vacuum vessel (VV). For the in-vessel loss of coolant of the FW cooling pipes, further optimization of the PSS or design solutions regarding in-vessel components and plasma control will be necessary to decrease the pressure load to the VV and ensure the integrity of the primary confinement barrier.

Experimental and Numerical Studies on Heat Transfer and Fluid Flow Characteristics in A Vacuum Vessel of Fusion Reactor after the Loss-Of-Vacuum-Events Occurred

Temperature distributions in a Tokamak vacuum vessel of fusion reactor after the loss-of-vacuum events occurred

Experimental Study on Buoyancy-Driven Exchange Flows Through Breaches of a Tokamak Vacuum Vessel in a Fusion Reactor under the Loss-of-Vacuum-Event Condition

Exchange Flow Characteristics in a Tokamak Vacuum Vessel of Fusion Reactor Under the Loss-of-Vacuum Conditions

Effects of breach area and length to exchange flow rates under the LOVA condition in a fusion

Thermal Hydraulic Characteristics During Ingress of Coolant and Loss of Vacuum Events in Fusion Reactors

Experimental Study Of Buoyancy-Driven Exchange Flow From Breaches Under Lova Condition

Fusion Safety Experiments in Jaeri

Experiments on Exchange Flow Through Two Breaches During Loss of Vacuum Accident in Nuclear Fusion Experimental Reactor

Basic Experiments During Loss of Vacuum Event (LOVE) in Fusion Experimental Reactor

Quantitative Evaluation of Exchange Flows and Moving Small Particles by Means of the Relation and Laser Holography Methods

Quantitative Measurement of Dust Mobilization in A Vacuum Vessel of A Fusion Reactor During the Loss-Of-Vacuum-Accident Event

Fundamental study of a water jet injected into a vacuum vessel of fusion reactor under the ingress of coolant event

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Numerical Simulation of Airflow and Dust Migration in Vacuum Vessel During Loss of Vacuum Accident for Updated CFETR

Proposal of Integrated Test Facility for in-Vessel Thermofluid Safety of Fusion Reactors

Thermofluid experiments on ingress of coolant event

Thermohydraulic experiments on a water jet into vacuum during ingress of coolant event in a fusion experimental reactor

Visualization on Mobilization Behavior of Radioactivated Dust in a Vacuum Chamber

3D transient CFD simulation of an in-vessel Loss-Of-Coolant Accident in the EU DEMO fusion reactor

Safety scenario and integrated thermofluid test