Abstract:Stannous oxide (SnO) and stannic oxide (SnO2) are both important wide-band-gap semiconductors. To study the conducive mechanism in detail, high quality epitaxial films are essential. Here we propose a simple method to grow high quality epitaxial films of either stannous oxide or stannic oxide on an r-plane sapphire substrate by using pulsed laser deposition with a metallic tin target. The valence state of tin is controlled by tuning the oxygen pressure during the deposition procedure. Metal tin impurities and the transition phase of Sn3O4 are avoided and the growth windows from stannous oxide to stannic oxide are confirmed. For single-crystalline SnO epitaxial film, a rocking curve half-width of 0.22 degrees is obtained, which is better than the 0.46 degrees of that on a YSZ substrate. The minimum roughnesses achieved were 0.37 nm for the SnO2 epitaxial film and 0.84 nm for the SnO epitaxial film. The epitaxial relationship between SnO and the r-sapphire substrate was determined to be SnO [(1) over bar 1 0]//sapphire [(1) over bar 2 (1) over bar 0] and SnO [1 1 0]//sapphire [1 0 (1) over bar 1]. For SnO2, the epitaxial relation is SnO2 [0 1 0]//sapphire [(1) over bar 2 (1) over bar1 0] and SnO2 [(1) over bar 0 1]//sapphire [1 0 (1) over bar 1]. The band schematics, deduced by combined XPS valence band spectroscopy and optical transmittance spectroscopy, indicated p-type bands of SnO and n-type bands of SnO2. Raman spectroscopy is suggested to be a superior fingerprint of SnO single-crystalline quality, due to its greater sensitivity than X-ray diffraction.

Low Temperature Epitaxial Growth of High Permittivity Rutile Tio2 on Sno2

Low‐Temperature Growth of Monolayer Rutile TiO2 Nanorod Films

Structural, Optical and Electrical Properties of R-Tio2:Sn/sno2:(f/nb) Tandem Film by Aerosol-Assisted Chemical Vapor Deposition

High-quality epitaxy of ruthenium dioxide, RuO2, on rutile titanium dioxide, TiO2, by pulsed chemical vapor deposition

Chemistry, Growth Kinetics, and Epitaxial Stabilization of Sn2+ in Sn-Doped Srtio3 Using (Ch3)(6)sn-2 Tin Precursor

Low‐Temperature Preparation of Anatase and Rutile Layers on Titanium Substrates and Their Ability to Induce in Vitro Apatite Deposition

In Situ Epitaxial Growth of Tio2 on Ruo2 Nanorods with Reactive Sputtering

Growth of Topological Crystalline Insulator SnTe Thin Films on Si(111) Substrate by Molecular Beam Epitaxy

STRUCTURE AND OPTICAL PROPERTIES OF HIGH-RATE LOW-TEMPERATURE GROWN TiO2 THIN FILMS BY REACTIVE MAGNETRON SPUTTERING

Low Temperature Growth of Epitaxial Ferroelectric BaTiO3

Electrical conductivity enhancement of epitaxially grown TiN thin films

Single Crystalline Highly Epitaxial Pt Thin Films On (001) Srtio3

Rutile-type Ge x Sn 1−x O 2 alloy layers lattice-matched to TiO 2 substrates for device applications

Polarization-Dependent Raman Spectroscopy of Epitaxial TiO2(B) Thin Films

From Stannous Oxide to Stannic Oxide Epitaxial Films Grown by Pulsed Laser Deposition with a Metal Tin Target

The Growth and Phase Transitions of Epitaxial Pb(Zr0.95ti0.05)O-3 Thin Films Prepared by Sputter Deposition Combined with Post-Annealing on Srtio3(1 0 0)

Atomically flat reconstructed rutile TiO2(001) surfaces for oxide film growth

Colossal Dielectric Permittivity in Hydrogen-Reduced Rutile TiO2 Crystals

Development of Rutile Titanium Oxide Thin Films as Battery Material Component Using Atomic Layer Deposition

Epitaxial Growth Route To Crystalline Tio2 Nanobelts With Optimizable Electrochemical Performance

Germanium dioxide: A new rutile substrate for epitaxial film growth