Abstract:Microdevices prepared in a silicon substrate have been widely used in versatile fields due to the matured silicon-based microfabrication technique and the excellent physical properties of silicon material. However, the high thermal conductivity of silicon restricts its application in most thermal microdevices, especially devices comprising different temperature zones. In this work, a parylene-filled-trench technique was optimized to realize high-quality thermal isolation in silicon-based microdevices. Parylene C, a heat transfer barricading material, was deposited on parallel high-aspect-ratio trenches, which surrounded the isolated target zones. After removing the remnant silicon beneath the trenches by deep reactive ion etching from the back side, a high-quality heat transfer barrier was obtained. By using narrow trenches, only 5 mu m thick parylene was required for a complete filling, which facilitated multi-layer interconnection thereafter. The parylene filling performance inside the high-aspect-ratio trench was optimized by two approaches: multiple etch-deposition cycling and trench profile controlling. A 4 x 6 array, in which each unit was kept at a constant temperature and was well thermally isolated individually, was achieved on a silicon substrate by using the present parylene-filled-trench technique. The preliminary experimental results indicated that the present parylene-filled-trench structure exhibited excellent thermal isolation performance, with a very low power requirement of 0.134 mW (K mm(2))(-1) for heating the isolated silicon unit and a high thermal isolation efficiency of 72.5% between two adjacent units. Accompanied with high-quality isolation performance, the microdevices embedded the present parylene-filled-trench structure to retain a strong mechanical connection larger than 400 kPa between two isolated zones, which is very important for a high-reliability-required micro-electro-mechanical-system (MEMS) device. Considering its room-temperature processing essence, the present parylene-filled-trench technique is believed to be a promising isolation method in the post-complementary metal oxide semiconductor MEMS integration.

Study and fabrication of a heater-strip embedded type micro-hotplate

Silicon based micro heating plate provided with embedded heating wire, and processing method thereof

Development of a Microheater with a Large Heating Area and Low Thermal Stress in the Heating Area

Study on Characterization of Micro Heater Used for Micro PCR Chip

Development of a Reliable Micro-Hotplate with Low Power Consumption

Analysis on Heat Resistance of the Micro Heat Pipe with Arteries

Design and Fabrication of a MEMS Heater with the Improved Double-Spiral Structure

Fabrication and Thermal Performance of Copper Pillars Modified Micro Heat Pipe (MHP)

Development of a High Throughput Micro-Heater Array with Controllable Temperature for Each Heating Unit

A Performance-Enhanced Liquid Metal-Based Microheater with Parallel Ventilating Side-Channels

Al doped poly-Si micro-heater for thermomechanical fabrication of micro/nano structure

Design, Simulation and Fabrication of A Silicon Micro Flat Heat Pipe with Axial Triangle Grooves

Experiment and Thermal Calculation of Micro Heater

A Parylene-Filled-Trench Technique for Thermal Isolation in Silicon-Based Microdevices

Fabrication of heater element in release system

Design and Fabrication of Integrated Micro-heat Sink

Glass-Based Micro-Hotplate with Low Power Consumption and TGV Structure Through Anodic Bonding and Glass Thermal Reflow

Study on a Low Power and High Efficiency Micro Heater Used in Μpcr Chip

A Novel Flexible Liquid Metal Microheater with a Textured Structure

Microheater Chips with Carbon Nanotube Resistors

New Microheater Based on Ion Implantation Technology for Micro Chamber Chip