Abstract:Thermal management of equipment in confined spaces is of great importance for the safe operation of equipment. Solid-liquid phase change materials (PCM) can be applied to the thermal management of intermittent electronic equipment because of their large isothermal latent heat absorption capacity. In this paper, experimental and numerical research on the thermal performance of an intermittent rectangular cavity plate fin PCM-based heat sink is carried out, which can be applied to heat dissipation in narrow spaces with high heat flow. The optimal PCM-based heat sink structure is obtained by numerical simulation based on the Taguchi method, and the enthalpy method is used to model the phase change process. Temperature testing and visualization experiments are used to visually present the PCM-based heat sink's internal temperature distribution and validate the numerical model. The effects of fin structure parameters, heating power, cooling air speed and number of intermittent cycles on thermal performance (base temperature, liquid fraction and operating time) are analyzed for different structured PCM-based heat sinks. The results show that the PCM-based heat sink with 8 fins, 15 mm fin height and 2 mm fin thickness has the longest stage C at the critical base temperature of 348 K and reaches the maximum operating time of 1193 s during the charging cycle. The natural convection in stage C of the charging cycle plays a crucial role in prolonging the operating time. Meanwhile, increasing the number of intermittent cycles can result in longer operating time and lower critical base temperature. As the number of intermittent cycles increases from 1 to 8, the temperature difference between the maximum and minimum temperature of the base during the whole cycle is reduced from 48 K to 25 K, and the temperature fluctuations gradually decrease.

Experiment and Thermal Calculation of Micro Heater

Study on a Low Power and High Efficiency Micro Heater Used in Μpcr Chip

Low Power Perforated Membrane Microheater

Study on Characterization of Micro Heater Used for Micro PCR Chip

Development of a Microheater with a Large Heating Area and Low Thermal Stress in the Heating Area

Design of heater integrated into micro direct methanol fuel cell

Parametric Studies On Membrane-Based Total Heat Exchanger Performance

Design and Thermal Analysis of Flexible Microheaters

A Performance-Enhanced Liquid Metal-Based Microheater with Parallel Ventilating Side-Channels

Simulation on Heat Transfer of Microchannels and Thermal Vias for High Power Electronic Packages

Numerical simulation of a heat sink embedded with a vapor chamber and calculation of effective thermal conductivity of a vapor chamber

Numerical Investigation on the Optimum Thermal Design of the Shape and Geometric Parameters of Microchannel Heat Exchangers with Cavities

Experimental study on the overall heat transfer capability of the thin liquid film at different positions in the three-phase contact line area

Numerical Analysis of Microchannels Designed for Heat Sinks

Finite Element Simulation of Micro-Thermoelectric Generators Based on Microporous Glass Template

Theoretical and Experimental Study on a Compound Insulation System for High Temperature Applications

Enhanced boiling heat transfer using conducting-insulating microcavity surfaces in an electric field: A lattice Boltzmann study

Numerical Simulation of Heat Transfer Characteristics of Capillary Radiant Heating Floor

Experimental and numerical investigations on the intermittent heat transfer performance of rectangular cavity plate fin phase change material based heat sink

Thermal performance analysis and optimization of air-supported membrane building envelope based on numerical simulation

Size Effect on Heat Transfer in Micro Gas Sensors