Abstract:Purpose The performance of solid fins inside a differentially heated cubical cavity is numerically studied in this paper. The main purpose of the study is to make an optimization to reach the maximum heat transfer in the enclosure having the solid fins with studied parameters. Design/methodology/approach The considered domain of interest is a differentially heated cube having heat-conducting solid fins placed on the heated wall while an opposite wall is a cooled one. Other walls are adiabatic. Governing equations describing natural convection in the fluid filled cube and heat conduction in solid fins have been written using non-dimensional variables such velocity and vorticity taking into account the Boussinesq approximation for the buoyancy force and ideal solid/fluid interfaces between solid fins and fluid. The formulated equations with appropriate initial and boundary conditions have been solved by the finite difference method of the second of accuracy. The developed in-house computational code has been validated using the mesh sensitivity analysis and numerical data of other authors. Analysis has been performed in a wide range of key parameters such as Rayleigh number (Ra = 10 4 –10 6 ), non-dimensional fins length (l = 0.2–0.8), non-dimensional location of fins (d = 0.2–0.6) and number of fins (n = 1–3). Findings From numerical methods point of view the used non-primitive variables allows to perform numerical simulation of convective heat transfer in three-dimensional (3D) regions with two advantages, namely, excluding difficulties that can be found using vector potential functions and reducing the computational time compared to primitive variables and SIMPLE-like algorithms. From a physical point of view, it has been shown that using solid fins can intensify the heat transfer performance compared to cavities without any fins. Fins located close to the bottom wall of the cavity have a better heat transfer rate than those placed close to the upper cavity surface. At high Rayleigh numbers, increasing the fins length beyond 0.6 leads to a reduction of the average Nusselt number, and one solid fin can be used to intensify the heat transfer. Originality/value The present numerical study is based on hybrid approach for numerical analysis of convective heat transfer using velocity and vorticity that has some mentioned advantages. Obtained results allow intensifying the heat transfer using solid fins in 3D chambers with appropriate location and length.

Numerical simulation of a heat sink embedded with a vapor chamber and calculation of effective thermal conductivity of a vapor chamber

Experimental and Numerical Investigation on Thermal Characteristics of the Heat Sink Integrating 3D Vapor Chamber Heat Spreader and Liquid Cooling Fins

Simulation, Experimentation, and Collaborative Analysis of Adjacent Heat Exchange Modules in a Vehicular Cooling System

Experimental Investigation on the Thermal Performance of a Large-Size Aluminum Vapor Chamber for Multi-Point Heat Sources

Numerical and experimental study of inverse natural convection heat transfer for heat sink in a cavity with phase change material

A Numerical Simulation Study on Two Kinds of CPU Heat Sinks

Computational Fluid Dynamics for Thermal Performance of a Water-Cooled Minichannel Heat Sink with Different Chip Arrangements

3D heat transfer analysis of a miniature copper-water vapor chamber with wicked pillars array

Numerical analysis on heat transfer characteristics of a multi-vapor channel vapor chamber with novel ultra-thin composite wick

Simulations on the effective thermal dissipation of the microchannel heat sink with different pin fins

Thermal Analysis of the Influent of Chip Arrangement of a Water-Cooled Minichannel Heat Sink

Investigations of the Thermal Spreading Effects of Rectangular Conduction Plates and Vapor Chamber

Numerical Simulation of the Thermal Hydraulic Performance of a Plate Pin Fin Heat Sink

Exploring modeling and testing approaches for three-dimensional integrated thermal resistance of chiplets

Numerical simulation of microchannel heat exchanger using CFD

Numerical Analysis of Flow and Thermal Performance of a Water-Cooled Wavy Microchannel Heat Sink

A simulation study of thermal and hydraulic characteristics mini-channel circular heat sink: effect of L-shaped multi-channel arrangement on flow maldistribution

Simulation of Thermal Distribution in SiC Power Modules with Pinfin Heatsink Based on Lattice Boltzmann Method

Numerical simulation of natural convection in a differentially heated cubical cavity with solid fins

Experimental Study on the Thermal Characteristics of a 3D Thermosyphon Heat Sink

Simulation on Heat Transfer of Microchannels and Thermal Vias for High Power Electronic Packages