Abstract:Polymerase chain reactions (PCR), thermally activated chemical reactions which are widely used for nucleic acid amplification, have recently received much attention in microelectromechanical systems and micro total analysis systems because a wide variety of DNA/RNA molecules can be enriched by PCR for further analyses. In the present work, a droplet-based micro oscillating-flow PCR chip was designed and fabricated by the silicon microfabrication technique. Three different temperature zones, which were stable at denaturation, extension and annealing temperatures and isolated from each other by a thin-wall linkage, were integrated with a single, simple and straight microchannel to form the chip's basic functional structure. The PCR mixture was injected into the chip as a single droplet and flowed through the three temperature zones in the main microchannel in an oscillating manner to achieve the temperature maintenance and transitions. The chip's thermal performance was theoretically analyzed and numerically simulated. The results indicated that the time needed for the temperature of the droplet to change to the target value is less than 1 s, and the root mean square error of temperature is less than 0.2 °C. A droplet of 1 µl PCR mixture with standard HPV (Human Papilloma Virus)-DNA sample inside was amplified by the present chip and the results were analyzed by slab gel electrophoresis with separation of DNA markers in parallel. The electrophoresis results demonstrated that the micro oscillating-flow PCR chip successfully amplified the HPV-DNA, with a processing time of about 15 min which is significantly reduced compared to that for the conventional PCR instrument.

New Microheater Based on Ion Implantation Technology for Micro Chamber Chip

Design and Thermal Analysis of a Micro-Chamber PCR Integrated Chip

Study on a Low Power and High Efficiency Micro Heater Used in Μpcr Chip

Study on Characterization of Micro Heater Used for Micro PCR Chip

The Design And Manufacture Of Functional Micro-Stationary Pcr Chip

Design and Experiment of a PDMS-based PCR Chip with Reusable Heater of Optimized Electrode

A Microchip-Based PCR Device Using Flexible Printed Circuit Technology

A Heater-Integrated Transparent Microchannel Chip for Continuous-Flow PCR

Laser microfabrication of a microheater chip for cell culture outside a cell incubator

Study on Large Area Temperature Control System for a Low-cost PCR Chip

A Thermocycler Using a Chip Resistor Heater and a Glass Microchip for a Portable and Rapid Microchip-Based PCR Device

Polymerase Chain Reaction Chip with Microchannel of Glass Capillaries Embedded

STUDY ON METAL MEMBRANE TEMPERATURE SENSOR AND MICROHEATER FOR PCR CHIP

Thermal Design of PCR Chip Based on Natural Convection in a Micro Chamber

Versatile printed microheaters to enable low-power thermal control in paper diagnostics

A PCR Chip with Reusable Electrodes and Its Temperature Analysis

Analysis on PCR Chip With Reusable Electrodes and its Temperature Field

Simulation and Design of a Self-Heating Continuous-Flow PCR Chip

Multichannel Oscillatory-Flow PCR Micro-Fluidic Chip with Controllable Temperature Gradient

Microheater Chips with Carbon Nanotube Resistors

Droplet-based Micro Oscillating-Flow PCR Chip