Abstract:This research explores the behavior of Co40Fe40W10B10 when it is sputtered onto Si(100) substrates with a thickness (tf) ranging from 10 nm to 100 nm, and then altered by an annealing process at temperatures of 200 °C, 250 °C, 300 °C, and 350 °C, respectively. The crystal structure and grain size of Co40Fe40W10B10 films with different thicknesses and annealing temperatures are observed and estimated by an X-ray diffractometer pattern (XRD) and full-width at half maximum (FWHM). The XRD of annealing Co40Fe40W10B10 films at 200 °C exhibited an amorphous status due to insufficient heating drive force. Moreover, the thicknesses and annealing temperatures of body-centered cubic (BCC) CoFe (110) peaks were detected when annealing at 250 °C with thicknesses ranging from 80 nm to 100 nm, annealing at 300 °C with thicknesses ranging from 50 nm to 100 nm, and annealing at 350 °C with thicknesses ranging from 10 nm to 100 nm. The FWHM of CoFe (110) decreased and the grain size increased when the thickness and annealing temperature increased. The CoFe (110) peak revealed magnetocrystalline anisotropy, which was related to strong low-frequency alternative-current magnetic susceptibility (χac) and induced an increasing trend in saturation magnetization (Ms) as the thickness and annealing temperature increased. The contact angles of all Co40Fe40W10B10 films were less than 90°, indicating the hydrophilic nature of Co40Fe40W10B10 films. Furthermore, the surface energy of Co40Fe40W10B10 presented an increased trend as the thickness and annealing temperature increased. According to the results, the optimal conditions are a thickness of 100 nm and an annealing temperature of 350 °C, owing to high χac, large Ms, and strong adhesion; this indicates that annealing Co40Fe40W10B10 at 350 °C and with a thickness of 100 nm exhibits good thermal stability and can become a free or pinned layer in a magnetic tunneling junction (MTJ) application.

Crystalline Orientation and Surface Structure Anisotropy of Annealed Thin Tungsten Films

ANISOTROPY BEHAVIOR OF SURFACE MORPHOLOGY AND PHASE STRUCTURE OF Cu-W THIN FILMS

Crystallographic Orientation Analysis of Nanocrystalline Tungsten Thin Film Using TEM Precession Electron Diffraction and SEM Transmission Kikuchi Diffraction

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

Observations of Orientation Dependence of Surface Morphology in Tungsten Implanted by Low Energy and High Flux D Plasma

Anomalous texture development induced by grain yielding anisotropy in Ni and Ni-Mo alloys

Effect of Crystal Orientation on Self-Assembly Nanocones Formed on Tungsten Surface Induced by Helium Ion Irradiation and Annealing

Renal transplantation in children younger than 6 years old.

Annealing Effect on the Contact Angle, Surface Energy, Electric Property, and Nanomechanical Characteristics of Co40Fe40W20 Thin Films

Microstructures and Nano Mechanical Properties of the Metal Tungsten Film

Influence of annealing on microstructure and electrochromic properties of WO3 thin film

How metal films de-wet substrates - identifying the kinetic pathways and energetic driving forces

Annealing Effect on the Characteristics of Co40Fe40W10B10 Thin Films on Si(100) Substrate

Effect of Annealing on the Structural, Magnetic, Surface Energy and Optical Properties of Co32Fe30W38 Films Deposited by Direct-Current Magnetron Sputtering

Evolution of microstructure and texture of moderately warm-rolled pure tungsten during annealing at 1300 °C

Recrystallization behavior of pure tungsten hot-rolled with high accumulated strain during annealing at 1250 C-1350 C

Influence of Postdeposition Annealing on Crystallinity of Zinc Oxide Films

In-situ observation of transition between surface relief and wrinkling in thin film shape memory alloys.

Raman scattering and high resolution electron microscopy studies of metal-organic chemical vapor deposition-tungsten disulfide thin films

Microstructure and Annealing Behavior of Three Rolled Pure Tungsten Plates with Different Thickness Reduction

Surface Configurations During Annealing of Sputter-Deposited NiTi Thin Films