Abstract:Ridge microstructures were prepared by etching through samples consisting of a series of stacked InAsxP1−x quantum wells (QWs) with step graded composition grown on InP by molecular beam epitaxy. Different etching techniques were used: wet etching with HCl/H2O and reactive ion etching with CH4/H2. These microstructures were characterized by low-temperature micro-photoluminescence. The photoluminescence (PL) emission associated with each QW was clearly identified. The PL was measured in detail across etched ridge stripes of various widths. Variations of the integrated PL intensities across the etched stripes were observed. The PL intensities for all QWs increase gradually from the edge to the center of the ridge microstructures. The PL intensity measured at the ridge center is systematically reduced for ridges which are 10 or 20 μm wide as compared to ridges which are 30 μm wide or larger. On the other hand, the spectral peak position of the PL lines remained constant with high accuracy (0.2–0.4 meV) across the microstructures. These observations are discussed in terms of the different possible mechanisms which determine the PL intensity variations, namely, non-radiative recombination at the etched walls and effects of stray electric fields which result from the etching process. Based on this discussion, we compare quantitatively the different etching processes which we have used. Altogether, this study illustrates the contribution that specially designed test structures, coupled with advanced spectroscopic characterization, can provide to the development of semiconductor photonic devices (e.g., lasers or waveguides) involving etching processes.

Luminescence Enhancement of Plasma-Etched InAsP∕InGaAsP Quantum Wells

Effect of Dry Etching on Light Emission of InAsP/InP SMQWs

Plasma etching of III-V semiconductors and mechanism of crystalline damage

Plasma etching ofⅢ-Ⅴsemiconductors and mechanism of crystalline damage

Temperature dependence of photoluminescence from as-grown and plasma-etched InAs0.45P0.55/In0.68Ga0.32As0.45P0.55 strained single quantum well

InAs0.45P0.55/InP Strained Multiple Quantum Wells Intermixed by Inductively Coupled Plasma Etching

Influence of Etching on the Luminescence Characteristic of Strained InAsP/InGaAsP Multiple Quantum Wells

Photoluminescence of InGaN/AlGaN Strained Multiple Quantum Wells Influenced by Dry Etching

ENHANCING THE PHOTOLUMINESCENCE OF InAsP/InP STRAINED MULTIPLE QUANTUM WELLS BY H+ IONS IMPLANTATION

Luminescent Properties of Annealed and Directly Wafer-Bonded InAsP/InGaAsP Multiple Quantum Wells

Argon Plasma Induced Quantum Well Intermixing Technology

Investigation of ICP Etching Damage of InAsP/InP Strained Multiple Quantum Wells

Enhanced Luminescence Performance of Quantum Wells by Coupling Piezo-Phototronic with Plasmonic Effects

Difference of luminescent properties between strained InAsP/InP and strain-compensated InAsP/InGaAsP MQWs

Nitrogen Plasma Enhanced Quantum Well Intermixing in InGaAsP/InP Laser Structure

Epitaxy and Physical Properties of 1.31μm Vertical Cavity Surface-Emitting Lasers

Photoluminescence Enhancement in Wide Spectral Range Excitation in CsPbBr3 Nanocrystal/ag Nanostructure Via Surface Plasmon Coupling

Surface Plasmon Polariton Photoluminescence Enhancement of Single InP Nanowires with InAsP Quantum Wells

Spatially resolved luminescence properties of etched quantum well microstructures

Mechanism on Effect of Surface Plasmons Coupling with InGaN/GaN Quantum Wells: Enhancement and Suppression of Photoluminescence Intensity