Effect of Acidulant on Coagulation Performance of Polysilicate Ferrite

Xia XU,Shui-li YU,Zhong-qun JIANG,Chao WU

DOI: https://doi.org/10.3321/j.issn:1000-4602.2008.21.025

2008-01-01

Abstract:Polysilicate ferrite (PSF) coagulants with the same Fe/Si molar ratio were prepared using four kinds of different acidulants (HCl,H2SO4,H3PO4,CH3COOH). The stability,modality and coagulation performance of four kinds of coagulants were investigated. The experimental results show that the gelatinization time of polysilicic acid prepared with acetic acid is longest among four kinds of PSFs under the acid condition. The coagulation performance of PSF prepared with acetic acid is better than that of PSF prepared with hydrochloric acid or sulphuric acid. The removal rates of turbidity and UV254 are 95% and 80% when the dosage is 6 mgFe/L. The coagulation performance of PSF prepared with phosphoric acid is the worst. The turbidity of water sample is increased when the dosage is more than 2 mgFe/L,and the removal rate of UV254 is 55% when the dosage is 8 mgFe/L. It is concluded that as a weak acid,the acetic acid slowly polymerizes with silicic acid,which is favorable for increasing the stability of polysilicic acid and is capable of improving the coagulation performance of PSF.