Abstract:This study addresses the challenges of time-delay and low accuracy in online gas-phase composition monitoring during olefin copolymerization processes. Three flowmeters based on different mechanisms are installed in series to measure the real-time exhaust gas flow rate from the reactor. For the same gas flow, the three flowmeters display different readings, which vary with the properties and composition of the gas mixture. Consequently, the composition of the mixed gas can be determined by analyzing the reading of the three flowmeters. Fitting equations and three machine learning models, namely decision trees, random forests, and extreme gradient boosting, are employed to calculate the gas composition. The results from cold-model experimental data demonstrate that the XGBoost model outperforms others in terms of accuracy and generalization capabilities. For the concentration of ethylene, propylene, and hydrogen, the determination coefficients (R2) were 0.9852, 0.9882, and 0.9518, respectively, with corresponding normalized root mean square error (NRMSE) values of 0.0352, 0.0312, and 0.0706. The effectiveness of the online monitoring device is further validated through gas phase copolymerization experiments involving ethylene and propylene. The yield and composition of the ethylene and propylene copolymers are successfully predicted using the online measurement data. To overcome the time-delay and low precision in on-line gas phase composition monitoring during olefin copolymerization, three flowmeters based on distinct principles are employed to detect exhaust gas in real-time. Machine learning models are used to calculate the gas composition. The efficacy of the online monitoring device is validated through gas phase copolymerization experiments of ethylene and propylene.image

Mathematical Model and Parameter Estimation for Gas-Phase Ethylene Homopolymerization with Supported Metallocene Catalyst

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Engineering Ethylene/1-Hexene Copolymers from Ethylene Stock with a Model-Guided Catalyst Feeding Policy

Physical Properties Computation of Pure Components for Ethylene Slurry Polymerization System

On‐Line Monitoring Device for Gas Phase Composition Based on Machine Learning Models and Its Application in the Gas Phase Copolymerization of Olefins

Modeling Ethylene/Butene Copolymerization with Multi‐site Catalysts: Parameter Estimability and Experimental Design

Quality Predicting Models for Ethylene Terpolymerization to High-Performance Polyethylene

Modeling and Kinetics of Tandem Polymerization of Ethylene Catalyzed by Bis(2-Dodecylsulfanyl-ethyl)amine-crcl3 and Et(Ind)2ZrCl2

Ethylene polymerization with metallocene/late transition metal combined catalysts

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

Kinetic Parameter Estimation for Linear Low-Density Polyethylene Gas-Phase Process from Molecular Weight Distribution and Short-Chain Branching Distribution Measurements

Molecular Dynamics Simulation of in Situ Polymerization: Chain Conformation Transition

Theoretical Study on the High Polymer Molecular Weight of Heteroatom-Substituted Constrained Geometry Catalyst

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Kinetics Of Propylene Bulk Polymerization With A Spherical Ziegler-Natta Catalyst

Modeling of the Molecular Weight Distribution and Short Chain Branching Distribution of Linear Low-Density Polyethylene from a Pilot Scale Gas Phase Polymerization Process

Simultaneous Simulation of Ethylene Slurry Polymerization Process

Modeling of Sequence Length Distribution for Olefin Copolymerization with Vanadium‐Based Catalyst

Ethylene Homopolymerization Kinetics with a Constrained Geometry Catalyst in a Solution Reactor

Studies on Kinetics of Ethylene-Propylene Gas-Phase Copolymerization

A Simultaneous Parameter And State Estimator For Polymerization Process Based On Molecular Weight Distribution