Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Kinetics Of Propylene Bulk Polymerization With A Spherical Ziegler-Natta Catalyst

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene glycol): Kinetics and Modeling

Modeling for the Diffusion Limitation of Free Radical Polymerization

Molecular Dynamics Simulation of in Situ Polymerization: Chain Conformation Transition

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Liquid Containing Particle Polymerization: Ethylene/-Olefin Reaction in a New Environment

Stability Analysis Of Ethylene Polymerization In A Liquid-Containing Gas-Solid Fluidized Bed Reactor

Modeling and Kinetics of Tandem Polymerization of Ethylene Catalyzed by Bis(2-Dodecylsulfanyl-ethyl)amine-crcl3 and Et(Ind)2ZrCl2

Estimation of the Chain Propagation Rate Constants of Propylene Polymerization and Ethylene‐1‐hexene Copolymerization Catalyzed with MgCl2‐supported Ziegler–Natta Catalysts

Stud On Propene Polymerization Using A Novel Spherical Ziegler-Natta Catalyst And Its Kinetics

Studies on Kinetics of Ethylene-Propylene Gas-Phase Copolymerization

Modeling the Effect of Polymerization Rate on the Intraparticle Mass and Heat Transfer During Propylene Polymerization in A Loop Reactor

Modeling of the Propylene Polymerization Catalyzed by Single‐/multi‐active Site Catalyst: A Monte Carlo Study

Study on Kinetics of Propylene Polymerization at Different Temperatures Via Monte Carlo Simulation

Kinetics of ethylene polymerization in gas phase with a spherical Ziegler-Natta catalyst

Comparative Study on Kinetics of Ethylene and Propylene Polymerizations with Supported Ziegler–Natta Catalyst: Catalyst Fragmentation Promoted by Polymer Crystalline Lamellae

Coupled-single-particle and Monte Carlo model for propylene polymerization

Multiple Active Site Monte Carlo Model for Heterogeneous Ziegler‐Natta Propylene Polymerization

Study on the kinetics of supported catalysts for propylene polymerization in slurry

A Rigorous Model for Hydrogen Response in Industrial Propylene Polymerization Loop Reactors: from Micro-Mechanism to Macro-Behavior

Study on Morphology and Particle Size Distribution of Polypropene Catalyzed by Novel Spherical Ziegler–Natta Catalyst