Abstract:This study addresses the challenges of time-delay and low accuracy in online gas-phase composition monitoring during olefin copolymerization processes. Three flowmeters based on different mechanisms are installed in series to measure the real-time exhaust gas flow rate from the reactor. For the same gas flow, the three flowmeters display different readings, which vary with the properties and composition of the gas mixture. Consequently, the composition of the mixed gas can be determined by analyzing the reading of the three flowmeters. Fitting equations and three machine learning models, namely decision trees, random forests, and extreme gradient boosting, are employed to calculate the gas composition. The results from cold-model experimental data demonstrate that the XGBoost model outperforms others in terms of accuracy and generalization capabilities. For the concentration of ethylene, propylene, and hydrogen, the determination coefficients (R2) were 0.9852, 0.9882, and 0.9518, respectively, with corresponding normalized root mean square error (NRMSE) values of 0.0352, 0.0312, and 0.0706. The effectiveness of the online monitoring device is further validated through gas phase copolymerization experiments involving ethylene and propylene. The yield and composition of the ethylene and propylene copolymers are successfully predicted using the online measurement data. To overcome the time-delay and low precision in on-line gas phase composition monitoring during olefin copolymerization, three flowmeters based on distinct principles are employed to detect exhaust gas in real-time. Machine learning models are used to calculate the gas composition. The efficacy of the online monitoring device is validated through gas phase copolymerization experiments of ethylene and propylene.image

Quality Predicting Models for Ethylene Terpolymerization to High-Performance Polyethylene

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Physical Properties Computation of Pure Components for Ethylene Slurry Polymerization System

On-line Measurements and Model Analysis of Gas-phase Ethylene Polymerization Process in Fluidized Bed Reactor (II)

On‐Line Monitoring Device for Gas Phase Composition Based on Machine Learning Models and Its Application in the Gas Phase Copolymerization of Olefins

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Engineering Ethylene/1-Hexene Copolymers from Ethylene Stock with a Model-Guided Catalyst Feeding Policy

Quality Control in the Polypropylene Manufacturing Process: an Efficient, Data-Driven Approach

Quality Prediction Via Semisupervised Bayesian Regression with Application to Propylene Polymerization

Mathematical Modeling of Polypropylene Quality for Spheripol Process

A Novel Modeling Approach and Its Application in Polymer Quality Index Prediction

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

Thermal stability analysis of ethylene polymerization fluidized bed reactors under condensed mode operation through a TPM-PBM integrated model

Optimization of grade transition for high-density polyethylene continuous slurry process

OPTIMAL GRADE TRANSITION IN CONTINUOUS POLYMERIZATION PROCESS

Quality prediction for polypropylene production process based on CLGPR model

Simulation of Resin Quality in Gas Phase Ethylene Polymerization in Fluidized Bed Reactor

Simultaneous Simulation of Ethylene Slurry Polymerization Process

Modeling of the Molecular Weight Distribution and Short Chain Branching Distribution of Linear Low-Density Polyethylene from a Pilot Scale Gas Phase Polymerization Process

Optimization of Ethylene Slurry Polymerization Conditions Based on Molecular Weight Distribution