Abstract:This study addresses the challenges of time-delay and low accuracy in online gas-phase composition monitoring during olefin copolymerization processes. Three flowmeters based on different mechanisms are installed in series to measure the real-time exhaust gas flow rate from the reactor. For the same gas flow, the three flowmeters display different readings, which vary with the properties and composition of the gas mixture. Consequently, the composition of the mixed gas can be determined by analyzing the reading of the three flowmeters. Fitting equations and three machine learning models, namely decision trees, random forests, and extreme gradient boosting, are employed to calculate the gas composition. The results from cold-model experimental data demonstrate that the XGBoost model outperforms others in terms of accuracy and generalization capabilities. For the concentration of ethylene, propylene, and hydrogen, the determination coefficients (R2) were 0.9852, 0.9882, and 0.9518, respectively, with corresponding normalized root mean square error (NRMSE) values of 0.0352, 0.0312, and 0.0706. The effectiveness of the online monitoring device is further validated through gas phase copolymerization experiments involving ethylene and propylene. The yield and composition of the ethylene and propylene copolymers are successfully predicted using the online measurement data. To overcome the time-delay and low precision in on-line gas phase composition monitoring during olefin copolymerization, three flowmeters based on distinct principles are employed to detect exhaust gas in real-time. Machine learning models are used to calculate the gas composition. The efficacy of the online monitoring device is validated through gas phase copolymerization experiments of ethylene and propylene.image

Modeling of the Molecular Weight Distribution and Short Chain Branching Distribution of Linear Low-Density Polyethylene from a Pilot Scale Gas Phase Polymerization Process

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Kinetic Parameter Estimation for Linear Low-Density Polyethylene Gas-Phase Process from Molecular Weight Distribution and Short-Chain Branching Distribution Measurements

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Physical Properties Computation of Pure Components for Ethylene Slurry Polymerization System

On‐Line Monitoring Device for Gas Phase Composition Based on Machine Learning Models and Its Application in the Gas Phase Copolymerization of Olefins

Optimal Flowsheet Configuration of a Polymerization Process with Embedded Molecular Weight Distributions

On-line Measurements and Model Analysis of Gas-phase Ethylene Polymerization Process in Fluidized Bed Reactor (II)

Investigation of a Dynamic Operation Mode of Ethylene Polymerization Process with a Liquid-Containing Fluidized Bed

Molecular Weight Distribution in Ring‐Opening Polymerization of Propylene Oxide Catalyzed by Double Metal Complex: A Model Simulation

Simulation on relative molecular mass distribution of LDPE tubular reactor

Modeling of Sequence Length Distribution for Olefin Copolymerization with Vanadium‐Based Catalyst

Quality Predicting Models for Ethylene Terpolymerization to High-Performance Polyethylene

Dynamic simulation of molecular weight distribution of ethylene slurry polymerization

Steady-State Optimization Of An Industrial High-Density Polyethylene Slurry Process Based On An Equation-Oriented Molecular Weight Distribution Model

Important Mesoscale Phenomena in Gas Phase Fluidized Bed Ethylene Polymerization

Kinetic Parameter Estimation of Hdpe Slurry Process from Molecular Weight Distribution: Estimability Analysis and Multistep Methodology

A Simultaneous Parameter And State Estimator For Polymerization Process Based On Molecular Weight Distribution

Simulation And Optimization Of The Molecular Weight Distribution In A Non-Ideal Polymerization Reactor

Optimization of Ethylene Slurry Polymerization Conditions Based on Molecular Weight Distribution

Equation-oriented optimization on an industrial high-density polyethylene slurry process with target molecular weight distribution