Abstract:Due to significant enhancement in heat removal capacity of recirculating gas and space-time yield of fluidized bed reactors, condensed mode operation has become most popular in gas-phase ethylene polymerization. A mathematical model for condensing mode operation of gas phase ethylene polymerization process was established, which included fluidized-bed reactor model, stage heat exchanger model, and control model of reactor temperature, pressure, and component partial pressure of recirculating gas. Process simulation was applied to obtain steady state solution when reactor temperature was controlled by close-loop, and dynamic behavior of the system under small perturbation was used to qualitatively analyze stability of ethylene polymerization when reactor temperature was controlled by open-loop and close-loop. Finally, stepwise response characteristics of ethylene polymerization close-loop system was studied under consideration of 1-hexene partial pressure and catalyst feed rate. Simulation results show that the steady state solutions are stable within the scope of studied conditions when reactor temperature is close-loop controlled, whereas the steady state solutions are divided into stable and unstable zone by bifurcation points when reactor temperature is open-loop controlled. The long and short period oscillations observed in stepwise response of reactor temperature to 1-hexene partial pressure reveal that ethylene polymerization system under condensed mode operation is a complex process with multiple coupling control loops.

Simultaneous Simulation of Ethylene Slurry Polymerization Process

Physical Properties Computation of Pure Components for Ethylene Slurry Polymerization System

Simultaneous design and control of polyethylene process based on uncertainty Kriging model

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Dynamic simulation of grade transition for ethylene slurry polymerization process based on simultaneous approach

Quality Predicting Models for Ethylene Terpolymerization to High-Performance Polyethylene

The Capacity Expansion of Hypol Polypropylene Plant by Process Reconstruction

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

Dynamic simulation of molecular weight distribution of ethylene slurry polymerization

Optimization of Ethylene Slurry Polymerization Conditions Based on Molecular Weight Distribution

Optimization of grade transition for high-density polyethylene continuous slurry process

Molecular Dynamics Simulation of in Situ Polymerization: Chain Conformation Transition

Modeling of ethylene slurry copolymerization system based on reaction mechanism

Modeling of Phase Equilibrium in Ethylene Slurry Polymerization System

Steady-State Optimization Of An Industrial High-Density Polyethylene Slurry Process Based On An Equation-Oriented Molecular Weight Distribution Model

Customization of Particle Size Distribution in Continuous Polymerization Process

Modeling of the Molecular Weight Distribution and Short Chain Branching Distribution of Linear Low-Density Polyethylene from a Pilot Scale Gas Phase Polymerization Process

Investigation of a Dynamic Operation Mode of Ethylene Polymerization Process with a Liquid-Containing Fluidized Bed

Simulation for Grade Transition of Ethylene Slurry Polymerization Process

Modeling and Kinetics of Tandem Polymerization of Ethylene Catalyzed by Bis(2-Dodecylsulfanyl-ethyl)amine-crcl3 and Et(Ind)2ZrCl2