Abstract:Due to significant enhancement in heat removal capacity of recirculating gas and space-time yield of fluidized bed reactors, condensed mode operation has become most popular in gas-phase ethylene polymerization. A mathematical model for condensing mode operation of gas phase ethylene polymerization process was established, which included fluidized-bed reactor model, stage heat exchanger model, and control model of reactor temperature, pressure, and component partial pressure of recirculating gas. Process simulation was applied to obtain steady state solution when reactor temperature was controlled by close-loop, and dynamic behavior of the system under small perturbation was used to qualitatively analyze stability of ethylene polymerization when reactor temperature was controlled by open-loop and close-loop. Finally, stepwise response characteristics of ethylene polymerization close-loop system was studied under consideration of 1-hexene partial pressure and catalyst feed rate. Simulation results show that the steady state solutions are stable within the scope of studied conditions when reactor temperature is close-loop controlled, whereas the steady state solutions are divided into stable and unstable zone by bifurcation points when reactor temperature is open-loop controlled. The long and short period oscillations observed in stepwise response of reactor temperature to 1-hexene partial pressure reveal that ethylene polymerization system under condensed mode operation is a complex process with multiple coupling control loops.

Modeling of Phase Equilibrium in Ethylene Slurry Polymerization System

Physical Properties Computation of Pure Components for Ethylene Slurry Polymerization System

Calculations of Physical Properties and Phase Equilibrium in Polyethylene Glycol Terephthalate Esterification System

Measurement of Phase Diagrams for New Aqueous Two-Phase Systems and Prediction by A Generalized Multicomponent Osmotic Virial Equation

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Simultaneous Simulation of Ethylene Slurry Polymerization Process

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Modeling of ethylene slurry copolymerization system based on reaction mechanism

Optimization of Ethylene Slurry Polymerization Conditions Based on Molecular Weight Distribution

Optimization of grade transition for high-density polyethylene continuous slurry process

Quality Predicting Models for Ethylene Terpolymerization to High-Performance Polyethylene

Liquid Containing Particle Polymerization: Ethylene/-Olefin Reaction in a New Environment

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

Stability Analysis Of Ethylene Polymerization In A Liquid-Containing Gas-Solid Fluidized Bed Reactor

Simulation for Grade Transition of Ethylene Slurry Polymerization Process

Solubility and volumetric mass transfer coefficient of ethylene and propylene in n-hexane solution of low molecular weight polyethylene

Customization of Particle Size Distribution in Continuous Polymerization Process

Study on Optimal Strategy of Grade Transition in Industrial Fluidized Bed Gas-Phase Polyethylene Production Process

Dynamic simulation of grade transition for ethylene slurry polymerization process based on simultaneous approach

Application of PC-SAFT with updated binary interaction parameters in phase equilibrium calculation for supercritical ethylene coordination polymerization system

Steady-State and Dynamic Modeling of the Solution Polyethylene Process Based on Rigorous PC-SAFT Equation of State