Abstract:A systematic study was conducted on the impact of annealing treatments on the microstructure and properties of cold-rolled Ti50Ni47Fe3 alloys using optical microscopy, scanning electron microscopy, electron backscattered diffraction, and an electronic universal testing machine. It was found that, during low-temperature annealing (400 °C and 500 °C), the annealing time had no significant effect on the microstructure or properties of the Ti50Ni47Fe3 alloy. Only elongation (δ) increased with the increase in the annealing time, and the grain orientation of the Ti50Ni47Fe3 alloy was //RD (rolling direction). When annealing at medium–high temperature (600 °C), as the annealing time increased, recrystallization and grain growth processes occurred, resulting in a continuous decrease in strength and an increase in δ. Meanwhile, it was found that the grain orientation of the cold-rolled Ti50Ni47Fe3 alloy changed from //RD during the recovery and recrystallization processes to //RD after the grain growth process. The orientation distribution function cross-section φ2 = 45° results indicate that the texture was mainly distributed along the γ orientation line (φ1 = 0~90°, Φ = 54.7°, φ2 = 45°). When annealed at 400 °C and 500 °C, the texture of the Ti50Ni47Fe3 alloys was (111)[uvw]. When the annealing treatment was 600 °C for 120 min, a (110)[uvw] texture occurred. Additionally, ductile fracture occurred in all specimens, and the crack origin was located on one side of the fracture surface, with obvious "Y"-shaped propagation. This article studied annealing treatments of cold-rolled Ti50Ni47Fe3 alloys, providing corresponding theoretical guidance for subsequent production applications.

The Effect of Annealing Treatment on Microstructure and Properties of TiN Films Prepared by Unbalanced Magnetron Sputtering

Effects of Annealing on TiN Thin Film Growth by DC Magnetron Sputtering

Effect of Annealing Temperature on Wettability of TiO2 Nanotube Array Films.

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Annealing Temperature Dependent Microstructure and Optical Properties of HfxTi1-xO2 Thin Films

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

Influence of Annealing Temperature on the Properties of Titanium Oxide Thin Film

Effect of substrate temperature and annealing on the growth of TiO2‐x thin films deposited by using DC‐magnetron sputtering technique

Investigation on Microstructure Evolution and Visible-Infrared Property of Vacuum-Heat-Treated TiN Film

High-temperature Annealing Effects on Epitaxial TiN Films on 4H-Sic

Effects of annealing temperature on the microstructure, mechanical and tribological properties of CrAlTiN coatings

The effect of different annealing temperatures on the mechanical and tribological properties of the Ti 2 AlN MAX phase films

Impact of Rapid Thermal Annealing of Ti/TiN Bilayers on Subsequent Chemical Vapor Deposition of Tungsten

Surface Characterization of Thermally Oxidized Titanium Alloys

Phase Formation in Annealed Sputtered (Fe,ti)-N Films

Effects of Substrate Temperature and Post-Annealing on Microstructure and Properties of (alcrnbsitiv)n Coatings

Surface Configurations During Annealing of Sputter-Deposited NiTi Thin Films

Effects of Annealing Treatment on the Microstructure and Heamocompatibility of TiNi Alloys Coated with Ta

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

Annealing Effect On The Microstructure Modification And Tribological Properties Of Amorphous Carbon Nitride Films

Annealing Temperature Effect on the Physical Properties of NiO Thin Films Grown by DC Magnetron Sputtering (Adv. Mater. Interfaces 9/2024)