Abstract:TiCrAlN hard films based on TiN or CrN show superior properties in terms of hardness, wear resistance, and thermal stability due to the addition of alloying elements. AlCrTiN films based on AlN may have higher thermal shock properties, but the knowledge of AlCrTiN films with high Al content has been insufficient until now. In this study, two sets of AlCrTiN hard films with different Al contents of 48 at.% and 58 at.% among metal components were prepared via multi-arc ion plating so as to investigate the effect of Al content on the phase composition, hardness, and thermal shock resistance of the films. The same microstructures, morphologies, and thicknesses of the fabricated film samples were achieved by changing the combination of cathode alloy targets and adjusting the arc source current during deposition. The surface chemical composition, cross-sectional elemental distribution, microstructure, morphology, phase composition, surface hardness, film/substrate adhesion strength, and thermal shock performance of the AlCrTiN films were examined. The obtained results reveal that the two sets of AlTiCrN hard films are face-centered cubic solid solutions with a columnar fine grain structure and a preferred growth orientation of (200) crystal plane. The hardness of the AlCrTiN films can be improved up to HV2850 by properly reducing the Al content from 58 at.% to 48 at.%. Meanwhile, the film/substrate adhesion performance is strong enough in terms of critical loads greater than 200 N. Furthermore, the AlCrTiN films maintain high thermal shock resistance at 600 °C when the Al content decreases from 58 at.% to 48 at.%. The optimal composition of the AlCrTiN hard films is 25:13:15:47 (at.%), based on the consideration of hardness, adhesion, and thermal shock cycling resistance. This optimal AlCrTiN hard film can be suggested as an option for protective coatings of hot process die tools.

The effect of different annealing temperatures on the mechanical and tribological properties of the Ti 2 AlN MAX phase films

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Investigation of Hardness, Tribological and Adhesion Properties of TiAlNiVN HEA Films Heat Treated at Different Temperatures

Effects of annealing temperature on the microstructure, mechanical and tribological properties of CrAlTiN coatings

Mechanical Properties of the TiAlSiN Coatings by Post Heat Treatments

Thermal and Thermo-Mechanical Properties of Ti–Al–N and Cr–Al–N Coatings

Phase Stability and Elasticity of TiAlN

Annealing Effect On The Microstructure Modification And Tribological Properties Of Amorphous Carbon Nitride Films

Improving the mechanical and tribological properties of TiAlSiN coatings by annealing

Tribological Properties and Preparation of (Ti,Al)N Coatings on High Speed Steel Substrate

Tribological Behaviors of Super-Hard TiAlN Coatings Deposited by Filtered Cathode Vacuum Arc Deposition

Mechanical and Tribological Properties of Multi-Element (alcrtatizr)n Coatings

Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating

Phase Composition, Hardness, and Thermal Shock Properties of AlCrTiN Hard Films with High Aluminum Content

Post-deposition annealing effects on microstructure, mechanical and tribological properties of AlCrN films

The Effect of Ti Addition on the Thermal Stability Of

The Effect of TiN, TiAlN, TiCN Thin Films Obtained by Reactive Magnetron Sputtering Method on the Wear Behavior of Ti6Al4V Alloy: A Comparative Study

Microstructure and tribological performance of (AlCrWTiMo)N film controlled by substrate temperature

Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films

Effect of Temperature and Rate Treatment Parameters on the Structural Phase State and Properties of Ti2AlNb Titanium Aluminide-Based Alloy

Enhancing mechanical and tribological performance of CrN/CrTiSiN coating through annealing treatment