Abstract:Traditional TiN coatings cannot meet the requirements in many applications under extreme conditions because of their relatively low hardness (similar to2000Hv), high friction coefficient (>0.4), inade- quate thermal stability and insufficient corrosion. (Ti,Al)N coatings are a promising alternative to TiN coatings, which have recently been obtained by some groups. However, The deposition of coatings on ceramic substrates prepared by traditional physical vapor deposition was puzzled by low adhesions. In this work, (Ti,Al)N deposition was realized by a new technique namely pulsed high energy density plasma. The ratio of Ti and Al atoms was kept constant at 1:1, since this was known to be the best ratio for (Ti,Al)N synthesis. However, the process allows many other deposition parameters to be varied. In this study, the influences of the discharge voltage between the inner and outer electrode, the distance between the sample and the pulsed plasma gun, and the shot number of the pulsed plasma on coating formation and properties were investigated. Under the optimum deposition conditions, the adhesive strength of (Ti,Al)N coating to Si3N4 ceramic substrate was satisfactory with the critical load up to more than 80 mN. In addition, the coatings were investigated with respect to mechanical and wear behavior, including nanohardness, Young's modulus and cutting performances. The (Ti,Al)N coatings possess resulted very high values of nanohardness and Young's modulus, which are near to 40 GPa and 680 GPa, respectively. Because of the deposition of (Ti,Al)N coatings the wear resistance and edge life of the coated tools were improved dramatically evaluated by the cutting perforinances of the coated tools in turning HT250 (HB230) steel under industrial conditions. These improvements were attributed to a combination of four effects of deposition, ion implantation, quench and solid solution strengthening in terms of the structural analyses.

Tribological Properties and Preparation of (Ti,Al)N Coatings on High Speed Steel Substrate

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Tribological Performances of TiAlN Film on TC4 Alloy Surface Prepared by Two Kinds of Arc Target

Tribological behaviour of TiAlN and AlCrN coatings on stainless steel

Tribological Behaviors of Super-Hard TiAlN Coatings Deposited by Filtered Cathode Vacuum Arc Deposition

Effect of Al Content on the Wear Evolution of Ti1-xAlxN-Coated Tools Milling Ti-6Al-4V Alloy

Influence of film structure on the microstructure and properties of TiAlN coatings on Al-Si alloys

Properties and Performance of TiAlSiN and AlCrN Monolayer and Multilayer Coatings for Turning Ti-6Al-4V

Growth, mechanical properties, and tribological performance of TiAlN/NbN and NbN/TiAlN bilayer coatings

Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN

Characterization and Tribological Behavior of TiAlN/TiAlCN Multilayer Coatings

Characterization of Superhard Ternary (ti,al)n Coatings Prepared by Pulsed High Energy Density Plasma

Study on wear behavior of TiAlN coating on GDL-4 high speed steel

Microstructure and Tribological Behavior of TiAlSiN Coatings Deposited by Deep Oscillation Magnetron Sputtering

Tribological Behavior of Patterned TiAlN Coatings at Elevated Temperatures

Microstructure, mechanical and tribological properties of multilayer TiAl/TiAlN coatings on Al alloys by FCVA technology

Controllable high adhesion and low friction coefficient in TiAlCN coatings by tuning the C/N ratio

Effects of modulation ratio on microstructure and properties of TiN/TiAlN multilayer coatings

Structure and Tribological Properties of CrTiAlCN Coatings with Various Carbon Contents

Finite element analysis of Ti 1-x Al x N coated tools cutting performance and tool wear during Ti-6Al-4V milling

Investigating the structure, adhesion and tribological properties of Al and Zr-doped TiN coatings with various substrate bias voltage and working pressure