Abstract:The growth mechanism and morphologies of AlN whiskers prepared by the carbothermal reduction method are studied as well as the technological condition. All experiments were carried out in a vertical, controlled-atmosphere, graphite element resistance furnace. The reactor chamber volume is Φ250×210 mm, and the reactant weight is about 20 g each times (it contains about 70 wt.% Al2O3). Nitrogen pressure in the furnace is 0.1 MPa (1 atm). The optimum growth condition is at 1700°C for 5 h with flowing nitrogen (0.6 l min−1), when the raw materials are α-Al2O3 and graphite (Al2O3:C=4:1 in weight). The yield of AlN whiskers is about 3–5 g each time, and 50 wt.% or more of Al2O3 can convert to AlN whiskers. Generally, whiskers with hexagonal cross section grow along 〈0001〉 and plate-like whiskers have a growth orientation parallel to 〈0111〉 et al other than 〈0001〉. During the growth of whiskers, the VLS mechanism and VS mechanism serve the function together. In the early stage, α-Al2O3 will react with CaO to form Ca-aluminates such as CaO·6Al2O3(CA6), CaO·2Al2O3(CA2), CaO·Al2O3 (CA). These Ca-aluminates can provide liquid catalysts for the nucleation of AlN whiskers. After that, the AlN whiskers will grow out from the substrate surface by the VS mechanism. As proximity to substrate surface, there is less growth space and higher supersaturation, and far from substrate surface, there is large growth space and low supersaturation. So near the substrate surface AlN whiskers are small and with irregular shape. Far from the substrate surface, AlN whiskers are sensibly straight and with regular shape.

Growth of single-crystal W whiskers during humid H2/N2 reduction of Ni, Fe–Ni, and Co–Ni doped tungsten oxide

Investigations of the nickel promotional effect on the reduction and sintering of tungsten compounds

Growth of K0.4WO3 whiskers via a pressure-relief-assisted hydrothermal process

Thermodynamics and Kinetic Considerations behind the Growth of AlN Whiskers Synthesized by Carbothermal Reduction

Insights into the Dual-Roles of Alloying Elements in the Growth of Sn Whiskers

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath

A comparative study on the growth behaviors of Sn whiskers and hillocks in a Sn-Al alloy coating under different environments

Growth of single-crystalline tungsten nanowires by an alloy-catalyzed method at 850 °C

A novel dissolution-precipitation mechanism during liquid phase sintering and its strengthening effects in W-Ni-Fe alloys with low W contents

Unraveling grain growth of metallic tungsten: Investigating the nanoscale realm of hydrogen reduction of tungsten oxides

A Study on the In-Situ Growth of Highly Oriented Zno Whisker

Growth Of Single-Crystalline Tungsten Nanowires By An Alloy-Catalyzed Method At 850 Degrees C

Growth Behavior of Ni on Hydrogen-Etched WS2 Surface

Anisotropic Growth Of Ni-3(Bo3)(2) Nanowhiskers On Nickel Substrates And Its Application In The Fabrication Of Superhydrophilic Surfaces

Morphologies and Growth Mechanisms of Aluminum Nitride Whiskers Synthesized by Carbothermal Reduction

Tungsten oxide nanowire growth by chemically-induced strain

Growth Mechanism of In-Situ WC Grain in Fe-Ni-W-C Alloys System

TiS2 whisker growth by a simple vapor-deposition method

Preparation and Growth Mechanism of TaCx Whiskers

Sn whisker growth mitigation by using NiO sublayers

Rapid and massive growth of tin whisker on mechanochemically decomposed Ti2SnC