Abstract:We report an efficient method to synthesize undoped and K-doped rare cubic tungsten trioxide nanowires through the thermal evaporation of WO3 powder without a catalyst. The WO3 nanowires are reproducible and stable with a low-cost growth process. The thermal evaporation processing was conducted in a three-zone horizontal tube furnace over a temperature range of 550–850 °C, where multiple substrates were placed at different temperature zones. The processing parameters, including pressure, temperature, type of gas, and flow rate, were varied and studied in terms of their influence on the morphology, aspect ratio and density of the nanowires. The morphologies of the products were observed with scanning electron microscopy. High resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction studies were conducted to further identify the chemical composition, crystal structure and growth direction of the nanostructures. Additionally, the growth mechanism has been proposed. Furthermore, we investigated the potassium doping effect on the physical properties of the nanostructures. Photoluminescence measurements show that there were shorter emission bands at 360 nm and 410 nm. Field emission measurements show that the doping effect significantly reduced the turn-on electric field and increased the enhancement factor. Furthermore, as compared with related previous research, the K-doped WO3 nanowires synthesized in this study exhibited excellent field emission properties, including a superior field enhancement factor and turn-on electric field. The study reveals the potential of WO3 nanowires in promising applications for sensors, field emitters and light-emitting diodes.

Tungsten oxide nanowire growth by chemically-induced strain

One-dimensional Sub-stoichiometric W3O8Nanowires Filled Carbon Nanotubes

Strain Induced Structural Phase Transition in TM6X6 (TM = Mo, W; X = S, Se, Te) Nanowires

Growth Of Metal And Metal Oxide Nanowires Driven By The Stress-Induced Migration

Growth And Characterization Of Cu-Catalyzed Zno Nanowires

Asymmetrical quantum dot growth on tensile and compressive-strained ZnO nanowire surfaces

Tungsten Oxide Nanowires on Tungsten Substrates

Growth Of Single-Crystalline Tungsten Nanowires By An Alloy-Catalyzed Method At 850 Degrees C

Growth of single-crystalline tungsten nanowires by an alloy-catalyzed method at 850 °C

Studies on the Synthesis and Growth Mechanism of Single Crystal ZnO Nanowires

Structures and defects of WO3−x nanorods grown by in-situ heating tungsten filament

Atomic-Scale Observation of Vapor-Solid Nanowire Growth Via Oscillatory Mass Transport

An Atomistic Study of the Deformation Behavior of Tungsten Nanowires

A Simple Method for the Synthesis of Tungsten Trioxide Nanorods Array Without Catalyst

Synthesis and Physical Characteristics of Undoped and Potassium-Doped Cubic Tungsten Trioxide Nanowires through Thermal Evaporation

Growth of Epitaxial Tungsten Nanorods

Growth of Large-Area Aligned Molybdenum Nanowires by High Temperature Chemical Vapor Deposition: Synthesis, Growth Mechanism, and Device Application

One-dimensional Tungsten Oxide Growth Through a Grain-by-grain Buildup Process

Diameter-specific growth of single-walled carbon nanotubes using tungsten supported nickel catalysts

Growth of Micron-Sized Tubes of Tungsten Oxide

The formation mechanism of the coaxial carbon–metal nanowires in a chemical vapor deposition process