Abstract:The brittleness of Si3N4 ceramics has always limited its wide application. In this paper, Si3N4 ceramics were prepared based on foam. Combining the unique honeycomb structure of the ceramic foams and the self-toughening mechanism of Si3N4, the strengthening and toughening of Si3N4 ceramics can be further achieved by adjusting the microstructure of Si3N4 ceramic foams. The powder particles are self-assembled by particle-stabilized foaming to form a foam body with a honeycomb structure. It was pretreated at different temperatures (1450-1750 degrees C). The microstructure evolution of foamed ceramics at different pretreatment temperatures and the conversion rate of alpha-Si3N4 to beta-Si3N4 at different pretreatment temperatures were explored. Then the foamed ceramics with different microstructures are hot-press sintered to prepare Si3N4 dense ceramics. The effects of different microstructures of foamed ceramics on the strength and toughness of Si3N4 ceramics were analyzed. The experimental results show that the relative density of Si3N4 ceramics prepared at a particle pretreatment temperature of 1500 degrees C is 97.8%, and its flexural strength and fracture toughness are relatively the highest, which are 1089 +/- 60 MPa and 12.9 +/- 1.3 MPa m(1/2), respectively. Compared with the traditional powder hot-pressing sintering, the improvement is 21% and 33%, respectively. It is shown that this method of preparing Si3N4 ceramics based on foam has the potential to strengthen and toughen Si3N4 ceramics.

beta-Si3N4 Powders by Faming SHS and Their Morphology Analysis

High-pressure Synthesis of High-Performance Submicron-Sized Polycrystalline Β-Si3n4 Bulk Without Additives

Coarse‐grained Β‐si3n4 Powders Prepared by Combustion Synthesis

Effects of Nitrogen Pressure and Diluent Content on the Morphology of Gel-Cast-foam-assisted Combustion Synthesis of Elongated Β-Si3n4 Particles

Coarse‐grained β‐Si 3 N 4 powders prepared by combustion synthesis

Research of Silicon Nitride Powder Prepared by Self-propagating High-temperature Synthesis

Effect of Pure Β-Si3n4powder on Microstructure and Mechanical Properties of Porous Si3N4ceramics

Study on particle-stabilized Si3N4 ceramic foams

A Novel Method of Strong and Tough Si3N4 Ceramic from the Particle‐stabilized Foam

Preparation of Si3N4 Foam Ceramics Using Short-Chain Amphiphile

Microstructure and Properties of Porous Si3N4 Ceramics Fabricated by Gelcasting

Synthesis and Mechanical Properties of Highly Porous Ultrafine-Grain Si3N4 Ceramics Via Carbothermal Reduction-Nitridation Combined with Liquid Phase Sintering

Combustion Synthesis Of Beta-Si3n4 And Beta-Sialon With Elongated Prismatic Micro-Crystals By Adding Srco3 And Nh4f

Synthesis of Spherical Si3N4 Powders by Liquid‐phase Modified Carbothermal Reduction and Nitridation

Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent

Preparation of Si 3N 4 foam ceramics with nest-like cell structure by particle-stabilized foams

Pore Structure Control of Si3n4 Ceramics Based on Particle-Stabilized Foams

Effect of Impurities MgO, CaO, Al2O3, AlN and Al on Α/β Ratio in Combustion Synthesis of Α-Si3n4

Effects of β-Si3N4 seeds addition on microstructure and mechanical properties of porous Si3N4 ceramics

Study on the Preparation,Properties and Mechnism of β-Si_3N_4 Crystal Seeds