Abstract:Pellet quality is one of the key technologies restricting the smelting of high proportion pellets in the blast furnace, especially the reduction swelling index of low silicon fluxed pellets. In this paper, the inhibition effect of grinding blast furnace return ore on the reduction swelling index of low silicon fluxed pellets was studied and application has been conducted in Shougang Jingtang Company. The experimental results show that the addition of 5–15% fine grinding blast furnace ore into pellet production significantly reduced the reduction swelling index of pellets from 23.5% to 14.3%. Microstructure and energy spectrum analysis shows that calcium ferrite, magnesium ferrite and liquid phase in the pellets with fine grinding blast furnace return ore increased obviously with a more uniform distributed liquid phase between hematite particles than in the basic group pellets and tended to be "homogenized". It is conducive to inhibiting the generation of ferric whiskers in the reduction process of the hematite phase, and thus contributes to the reduction of the swelling index. Since its implementation at Shougang Jingtang in 2020, this technology has yielded positive results. The fluxed pellets exhibit good quality with an alkalinity of 1.1, a SiO 2 content of 2.1%, and a reduction in the swelling index from 18.1% to 16.5%. Besides, the pellet ratio into blast furnace has reached 55%, the cumulative average utilization coefficient of three 5500 m 3 super-large blast furnaces is 2.43t/(m 3. d), and the monthly average for a single furnace reaches 2.62t/(m 3. d). Meanwhile, consumption reduction of calcium-containing flux slaked lime in fluxed pellets by 0.9% is greatly beneficial to reducing the cost of pellets and expanding the resources of pellet powder.

Development of Gas-based Shaft Furnace Direct Reduction Pellet Technology

Improving hydrogen-rich gas-based shaft furnace direct reduction of fired hematite pellets by modifying basicity

Effect of Carbon Addition on Direct Reduction Behavior of Low Quality Magnetite Ore by Reducing Gas Atmosphere

A Numerical Study of the Thermochemical and Aerodynamic States of H2‐intensive Direct Reduction Shaft Furnace

Reduction of Iron‐Ore Pellets Using Different Gas Mixtures and Temperatures

Application of Entrained-Bed Pulverized Coal Gasification in Direct Reduction Iron-Making

Toward environmentally friendly direct reduced iron production: A novel route of comprehensive utilization of blast furnace dust and electric arc furnace dust

A Review on the Modeling of Direct Reduction of Iron Oxides in Gas‐Based Shaft Furnaces

Computational analysis of hydrogen reduction of iron oxide pellets in a shaft furnace process

Research on influence of grinding blast furnace return ore on reduction swelling index of low silicon fluxed pellets and production practice

Optimization of Hydrogen-Based Shaft Furnace Raw Material Parameters Based on Numerical Simulation and Rist Operation Diagram

Direct Reduction of Iron Ore Pellets by Using CO/CO2 and CO Gases

Direct reduction swelling behavior of pellets in hydrogen-based shaft furnaces under typical atmospheres

The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

Fundamental Study on Utilization of Titanium Resources by RHF Process

Study on the reduction of Fe2O3 pellets by CO-CO2 and H2-H2O: Reaction kinetics and pore network model

Sticking Behavior of Pellets During Direct Reduction Based on Hydrogen Metallurgy: An Optimization Approach Using Response Surface Methodology

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales

Hydrogen-based direct reduction of industrial iron ore pellets: Statistically designed experiments and computational simulation

A Numerical Study on the Process of the H2 Shaft Furnace Equipped with a Center Gas Distributor

Sticking in Shaft Furnace and Fluidized Bed Ironmaking Processes: A Comprehensive Review Focusing on the Effect of Coating Materials