Abstract:This process modelling study explored the behaviour of hydrogen-based direct reduced iron (DRI) manufacturing in a shaft furnace. Various performance parameters such as metallisation ratio (MR), consumption of hydrogen per tonne of DRI, production of by-products, reactor energy demand and total energy demands for the process have been analysed with respect to temperature, ore grade (gangue content), and reactant conditions. The HSC Chemistry (H: enthalpy, S: entropy and C: heat capacity) SIM (simulation) module was employed for the modelling coupled with the Gibbs energy minimisation calculation. The shaft furnace was divided into three zones to model the three-step reduction of iron ore in a counterflow arrangement. Results show that temperature and hydrogen supply have a significant effect on the metallisation of DRI. Increasing temperature and hydrogen flow rate were predicted to increase the MR or reducibility. A full metallisation can be achieved with hydrogen supply of 130, 110, 100 and 90 kg/tDRI at 700, 800, 900 and 1000°C, respectively, using the best-grade ore (Fe 69 wt.%, gangue 5.2 wt.%). However, the hydrogen consumption in full metallisation was calculated to be 54 kg/tDRI (tonne of DRI). At full MR, the reactor energy consumption (supplementary electrical energy) was calculated to be 0.56 to 0.59 MWh/t Fe feed using the reactor temperature from 700 to 1000°C. Ore grade or gangue content has a significant impact on reactor energy demand. For example, at 900°C, the top-grade ore was calculated to consume 0.69 MWh/tDRI compared to 0.88 MWh/tDRI using the lowest grade ore. A certain percentage of CO (i.e. 15%) blended with hydrogen was predicted to be beneficial for metallisation, hydrogen consumption, and overall energy demand. However, increasing CO would increase CO 2 emissions significantly.

Computational analysis of hydrogen reduction of iron oxide pellets in a shaft furnace process

A Numerical Study of the Thermochemical and Aerodynamic States of H2‐intensive Direct Reduction Shaft Furnace

Numerical Simulation Study of Co-injection of Pulverized Coal and Hydrogen in the Tuyere-Raceway

Optimization of Hydrogen-Based Shaft Furnace Raw Material Parameters Based on Numerical Simulation and Rist Operation Diagram

Computational Study of Hot Gas Injection (HGI) into an Ironmaking Blast Furnace (BF)

Operation enhancement of the H 2 shaft furnace: a numerical study on the impact of N 2 mixing in feed gas

A Numerical Study on the Process of the H2 Shaft Furnace Equipped with a Center Gas Distributor

Study on optimization of reduction temperature of hydrogen-based Shaft Furnace—Numerical simulation and multi-criteria evaluation

Assessment of Shaft Gas Injection Technology for Blast Furnace Ironmaking

Direct reduction swelling behavior of pellets in hydrogen-based shaft furnaces under typical atmospheres

Effects of hydrogen-rich fuel injection on the states of the raceway in blast furnace

Particle-scale Modelling of Injected Hydrogen and Coke Co-Combustion in the Raceway of an Ironmaking Blast Furnace

Process modelling for the production of hydrogen-based direct reduced iron in shaft furnaces using different ore grades

Hydrogen reduction of iron oxides in shaft furnaces

Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

A Review on the Modeling of Direct Reduction of Iron Oxides in Gas‐Based Shaft Furnaces

Novel experimental method to simulate reduction behaviour of burden in blast furnace shaft

Advanced physical model of hydrothermic reduction of iron ore pellets by dissociated 2H+ ionic gas in the shaft furnace

Detailed Modeling of the Direct Reduction of Iron Ore in a Shaft Furnace

Mathematical Modeling for the Process of Smelting Reduction Ironmaking Integrated with Hydrogen-Rich Coal Gasification

Experimental and Numerical Simulation Study on Reduction of Pellets Based on X-ray Micro-computed Tomography