Abstract:Iron- and steelmaking cause ∼7% of the global CO2 emissions, due to the use of carbon for the reduction of iron ores. Replacing carbon by hydrogen as the reductant offers a pathway to massively reduce these emissions. However, the production of hydrogen using renewable energy will remain as one of the bottlenecks at least during the next two decades, because making the gigantic annual crude steel production of 1.8 billion tons sustainable requires a minimum stoichiometric amount of ∼97 million tons of green hydrogen per year. Another fundamental aspect to render the ironmaking sector more sustainable lies in an optimal utilization of green hydrogen and energy, thus reducing efforts for costly in-process hydrogen recycling. We therefore demonstrate here how the efficiency in hydrogen and energy consumption during iron ore reduction can be dramatically improved by the knowledge-based combination of two technologies: partially reducing the ore at low temperature via solid-state direct reduction (DR) to a kinetically defined degree, and subsequently melting and completely transforming it to iron under a reducing plasma (i.e. via hydrogen plasma reduction, HPR). Results suggest that an optimal transition point between these two technologies occurs where their efficiency in hydrogen utilization is equal. We found that the reduction of hematite through magnetite into wüstite via DR is clean and efficient, but it gets sluggish and inefficient when iron forms at the outermost layers of the iron ore pellets. Conversely, HPR starts violent and unstable with arc delocalization, but proceeds smoothly and efficiently when processing semi-reduced oxides, an effect which might be related to the material's high electrical conductivity. We performed hybrid reduction experiments by partially reducing hematite pellets via DR at 700 °C to 38% global reduction (using a standard thermogravimetry system) and subsequently transferring them to HPR, conducted with a lean gas mixture of Ar-10%H2 in an arc-melting furnace, to achieve full conversion into liquid iron. This hybrid approach allows to exploit the specific characteristics and kinetically favourable regimes of both technologies, while simultaneously showing the potential to keep the consumption of energy and hydrogen low and improve both, process stability and furnace longevity by limiting its overexposure to plasma radiation.

Hydrogen reduction of iron oxides in shaft furnaces

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales

Hydrogen steelmaking. Part 1: Physical chemistry and process metallurgy

Process modelling for the production of hydrogen-based direct reduced iron in shaft furnaces using different ore grades

A Laboratory Study of the Reduction of Iron Oxides by Hydrogen

Advanced physical model of hydrothermic reduction of iron ore pellets by dissociated 2H+ ionic gas in the shaft furnace

Results of Hydrogen Reduction of Iron Ore Pellets at Different Temperatures

Hierarchical nature of hydrogen-based direct reduction of iron oxides

The Direct Reduction of Iron Ore with Hydrogen

Green steel at its crossroads: Hybrid hydrogen-based reduction of iron ores

A Numerical Study of the Thermochemical and Aerodynamic States of H2‐intensive Direct Reduction Shaft Furnace

Thermodynamic analysis and experimental verification of the direct reduction of iron ores with hydrogen at elevated temperature

The Influence of Nitrogen on Hydrogen Reduction of Iron Ore Pellets

Decarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen

Clean iron production through direct reduction of mineral iron carbonate with low-grade hydrogen sources; the effect of reduction feed gas composition on product and exit gas composition

A Review on the Modeling of Direct Reduction of Iron Oxides in Gas‐Based Shaft Furnaces

Hydrogen-based direct reduction of combusted iron powder: deep pre-oxidation, reduction kinetics and microstructural analysis

Hydrogen-Based Direct Reduction of Iron Oxides: A Review on the Influence of Impurities

Detailed Modeling of the Direct Reduction of Iron Ore in a Shaft Furnace

Hydrogen technologies for decarbonization of ferrous metallurgy: scientific background and technical capabilities

The perspective of hydrogen direct reduction of iron