Abstract:Iron- and steelmaking cause ∼7% of the global CO2 emissions, due to the use of carbon for the reduction of iron ores. Replacing carbon by hydrogen as the reductant offers a pathway to massively reduce these emissions. However, the production of hydrogen using renewable energy will remain as one of the bottlenecks at least during the next two decades, because making the gigantic annual crude steel production of 1.8 billion tons sustainable requires a minimum stoichiometric amount of ∼97 million tons of green hydrogen per year. Another fundamental aspect to render the ironmaking sector more sustainable lies in an optimal utilization of green hydrogen and energy, thus reducing efforts for costly in-process hydrogen recycling. We therefore demonstrate here how the efficiency in hydrogen and energy consumption during iron ore reduction can be dramatically improved by the knowledge-based combination of two technologies: partially reducing the ore at low temperature via solid-state direct reduction (DR) to a kinetically defined degree, and subsequently melting and completely transforming it to iron under a reducing plasma (i.e. via hydrogen plasma reduction, HPR). Results suggest that an optimal transition point between these two technologies occurs where their efficiency in hydrogen utilization is equal. We found that the reduction of hematite through magnetite into wüstite via DR is clean and efficient, but it gets sluggish and inefficient when iron forms at the outermost layers of the iron ore pellets. Conversely, HPR starts violent and unstable with arc delocalization, but proceeds smoothly and efficiently when processing semi-reduced oxides, an effect which might be related to the material's high electrical conductivity. We performed hybrid reduction experiments by partially reducing hematite pellets via DR at 700 °C to 38% global reduction (using a standard thermogravimetry system) and subsequently transferring them to HPR, conducted with a lean gas mixture of Ar-10%H2 in an arc-melting furnace, to achieve full conversion into liquid iron. This hybrid approach allows to exploit the specific characteristics and kinetically favourable regimes of both technologies, while simultaneously showing the potential to keep the consumption of energy and hydrogen low and improve both, process stability and furnace longevity by limiting its overexposure to plasma radiation.

Results of Hydrogen Reduction of Iron Ore Pellets at Different Temperatures

Reduction of Iron‐Ore Pellets Using Different Gas Mixtures and Temperatures

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales

A Laboratory Study of the Reduction of Iron Oxides by Hydrogen

Thermodynamic analysis and experimental verification of the direct reduction of iron ores with hydrogen at elevated temperature

Impact of Iron Ore Pre-Reduction Degree on the Hydrogen Plasma Smelting Reduction Process

The Direct Reduction of Iron Ore with Hydrogen

Hydrogen-based direct reduction of industrial iron ore pellets: Statistically designed experiments and computational simulation

Green steel at its crossroads: Hybrid hydrogen-based reduction of iron ores

Investigation of reduction behavior of various iron ores in a hydrogen-rich reducing atmosphere

Influence of microstructure and atomic-scale chemistry on iron ore reduction with hydrogen at 700°C

The Influence of Nitrogen on Hydrogen Reduction of Iron Ore Pellets

Studies on the Reduction Behavior of Iron Oxide Pellet Fines with Hydrogen Gas: Mechanism and Kinetic Analysis

An Overview Analysis of Current Research Status in Iron Oxides Reduction by Hydrogen

Mineralogical Aspects of Reducing Lump Iron Ore, Pellets, and Sinter with Hydrogen

Kinetic Analysis of Isothermal and Non-Isothermal Reduction of Iron Ore Fines in Hydrogen Atmosphere

Hydrogen reduction of iron oxides in shaft furnaces

Thermodynamic of Liquid Iron Ore Reduction by Hydrogen Thermal Plasma

Green Ironmaking at Higher H2 Pressure: Reduction Kinetics and Microstructure Formation During Hydrogen-Based Direct Reduction of Hematite Pellets

Direct reduction of iron to facilitate net zero emissions in the steel industry: A review of research progress at different scales

Optimization of Hydrogen Utilization and Process Efficiency in the Direct Reduction of Iron Oxide Pellets: A Comprehensive Analysis of Processing Parameters and Pellet Composition