Abstract:Hydrogen-based direct reducing iron production (H-DRI) possesses great potential for energy saving and emission reduction of greenhouse gas in metallurgical industries. Although the relevant research has been studied since long, the thermodynamics and process of reduction by pure H 2 in a broad temperature range are not well understood. Hence, we conducted a thermodynamic analysis of different iron ores (hematite and magnetite) reduced by H 2 at 300–1700 K to study the phase-composition variation with temperature. Subsequently, we explored the reduction process of iron ores by pure H 2 at 1173 K and 1673 K, respectively, to further investigate the influence of ore species and temperature on the microstructure evolution of ultimate metallic iron. The results reveal that excessive H 2 favors the transition from FeO to Fe in the last reduction step, and the magnetite achieves a higher reduction extent than hematite. Temperature above 837 K is beneficial for avoiding the occurrence of the disproportionation reaction and promoting the FeO → Fe transition to improve the reduction extent. Meanwhile, the higher volume mismatch and the associated stresses between hetero-phases at 1673 K contributed to the formation of large-size pores or cracks. The higher content of dense Fe layers formed in magnetite at relatively lower temperature served as barriers against the diffusion of O, leading to the retention of abundant closed pores in the iron matrix. The oxide impurities cannot be reduced by H 2 at 1673 K instead translated into oxide inclusions due to their low oxide-formation free energies, of which the coagulation was facilitated by increasing temperature as the higher velocity of migration and movement. With this study, we aim to provide theoretical direction for the practical application development of H-DRI.

Improving hydrogen-rich gas-based shaft furnace direct reduction of fired hematite pellets by modifying basicity

Investigation of reduction behavior of various iron ores in a hydrogen-rich reducing atmosphere

Study on gas-based reduction mechanism of ultra-high-grade pellets with high basicity by experiment tests and first-principles calculation

Direct reduction swelling behavior of pellets in hydrogen-based shaft furnaces under typical atmospheres

Effect of Hydrogen-Rich Atmosphere on the Reduction Behavior and Kinetics of Iron-Ore Pellets Under Non-isothermal Conditions

Effect of CO–CO2 and H2–H2O on the reduction degree of fluxed pellets: reduction mechanism within hydrogen-rich blast furnace

Investigation of the Hydrogen-Rich Reduction of Panzhihua Ilmenite Concentrate Pellets

Green Ironmaking at Higher H2 Pressure: Reduction Kinetics and Microstructure Formation During Hydrogen-Based Direct Reduction of Hematite Pellets

Development of Gas-based Shaft Furnace Direct Reduction Pellet Technology

Effect of basicity on the reduction swelling behavior and mechanism of limestone fluxed iron ore pellets

Optimization of Hydrogen Utilization and Process Efficiency in the Direct Reduction of Iron Oxide Pellets: A Comprehensive Analysis of Processing Parameters and Pellet Composition

Parametric study on hematite pellet direct reduction by hydrogen

Effect of H2 on Blast Furnace Ironmaking: A Review

Hydrogen-based direct reduction of industrial iron ore pellets: Statistically designed experiments and computational simulation

A Numerical Study of the Thermochemical and Aerodynamic States of H2‐intensive Direct Reduction Shaft Furnace

Optimization of Hydrogen-Based Shaft Furnace Raw Material Parameters Based on Numerical Simulation and Rist Operation Diagram

Thermodynamic analysis and experimental verification of the direct reduction of iron ores with hydrogen at elevated temperature

Reduction kinetics of iron oxide pellets with H2 and CO mixtures

Experimental and Numerical Simulation Study on Reduction of Pellets Based on X-ray Micro-computed Tomography

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales

Effect of manganese ore and basicity on the consolidation characteristic of nickel‐chromium iron ore pellets