Study on experiments and numerical simulation of coal combustion characteristics under different thermal environments
Wenzhou Du,Bowen Wang,Yingjun Sun,Houwang Wang,Kuo Niu,Yansong Zhang,Wenbin Zhao
DOI: https://doi.org/10.1016/j.csite.2024.104167
IF: 6.268
2024-02-24
Case Studies in Thermal Engineering
Abstract:In order to study heat release rate and flue gas generation during residual coal in goaf combustion, a cone calorimeter was used to research on combustion characteristics of bituminous coal under different heat radiation flux conditions. A novel coal fire FOAM solver for coal combustion is developed, numerically simulated by varying the gas atmosphere, and compared with the above experimental results. The results showed that with the increase in heat radiation flux, the shorter the time to reach the peak heat release rate, the greater the maximum heat release rate. When the coal does not enter the ignition stage, the CO production rate is higher than that after ignition, and the CO2 production rate is lower than that after ignition. Compared with the experimental results of the cone calorimeter, the difference between the two results is very small, which verified the feasibility and accuracy of the coal combustion model. After the injection of the composite inert gas, the heat release rate and mass loss rate of coal combustion have varying degrees of lag. The numerical simulation results can provide a theoretical basis for injecting inert compounds into the goaves of coal mines to prevent the spontaneous combustion of coal.
thermodynamics