Abstract:The combustibility of modified coal powder was tested by self-made combustion device and thermal analysis device, and then compared to original samples. With the help of self-made combustion device, the combustion ratio can be measured. With the help of thermal analysis device, the combustibility of coal powder at different temperatures can be precisely and thoroughly studied. Through the comparision of modified and original coal powder, it can be concluded that the coal powder combustion achieved improvement. When the modified-power is 264 watts, the best modified-time of Yangquan anthracite is 40 seconds. The combustion ratio of the best modified coal powder increases by 10.4%. In order to thoroughly study the combustibility of coal powder, the reactivity of coal powder with CO2 was analyzed by thermal analysis device. The results indicated that the reactivity between modified Yangquan anthracite powder and CO2 between 450° and 650° was slightly worse than original coal powder, while same or nearly same at other temperatures. In order to study the mechanism of modification on coal powder, morphology and chemical compositions of coal powder before and after modification were studied by utilizing scanning electron microscopy and X-ray diffraction. The photos took by SEM showed that the air holes on the surface of coal particles increased as the extension of time. But when time exceeded some ranges, the air holes morphology seemed to be destroyed. The combustion ratio reached the peak when air holes morphology was at the best condition. The results of X-ray diffraction indicated that the chemical composition of coal powder barely changed with the modification of low power and short time. It can be concluded that microwave modification has no effect on the chemical composition of coal powder. © 2011 IEEE.

Study on Coal Combustion Features with Thermal Balance

Study on the Variation of Coal Properties for Different Coal Diameters and Its Effects on Combustion Characteristics

STUDY ON IMPROVEMENT OF BURNING BEHAVIOR FOR INDONESIAN COAL AND ITS APPLICATION ON 300 MW UNITS

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

The Establishment of the Pure Coal Ignition Temperature Index under the Condition of Thermobalance

Study on Coal Ash Fusion Characteristics with TG-DSC Method

Study on experiments and numerical simulation of coal combustion characteristics under different thermal environments

A Study on the Combustion Properties of Western Chinese Coals

STUDY ON CORRELATIVITY BETWEEN UNBURNED CARBON IN FLY ASH OF BOILERS AND THE COMBUSTION PROPERTIES OF COAL

Establishment of Combustion Stability Index of Pulverized-Coal

Experimental research on combustion of modification Yangquan coal

Thermogravimetric Analysis On The Combustion Characteristics For Blended Coals

Co-combustion of Coal and Carbonaceous Wastes: Thermogravimetric Analysis

TEST STUDY ON AND ANALYSIS OF BURNING BEHAVIOR FOR COAL UNDER ATMOPHERE OF O2/CO2

Experimental Study On The Comprehensive Behavior Of Combustion For Blended Coals

Study on coal combustion characteristics in a W-shaped boiler furnace

EXPERIMENTAL STUDY ON THE PROPERTY OF Nox EMISSION IN HIGH TEMPERATURE COMBUSTION OF COMMONLY USED COAL SORTS AND THEIR MIXTURES IN LARGE-SCALE TANGENTIALLY FIRING PULVERIZED COAL BOILERS

Study on Dynamic Reaction Parameters of Anthracite Combustion by Using Different Thermoanalytical Methods

Research on Combustion Characteristics of Mixed Fuels of Fly-Ash and Coal

A New Method Based on Multi-heating Rate Methods for Coal Combustion Parameters

Thermogravimetric Analysis of Coal-char under O2/CO2 Atmosphere