Abstract:Low and medium temperature pyrolysis technology is an important way of clean and utilization of low metamorphic coal. In this paper, three kinds of char samples were prepared in tube furnace according to different pyrolysis temperatures, and their combustion characteristics were compared by means of thermal analysis. Three modeless kinetic methods, KAS, FWO and Fredman, were used to study the combustion reaction activity under nonisothermal conditions from TG curve and DSC curve. In the end, Malek method is used to explore the mechanism function of the reaction process, and the results are analyzed numerically. The objective programming model and MATLAB are used to calculate the combined mechanism function of the reaction process. The results show that with the increase in the pyrolysis temperature, the combustion of char gradually shifts to the high temperature zone and shows a secondary effect between the volatile matter and the combustion characteristic temperature. The results show that the flammability index and burnout index increase first and then decrease, and the char prepared at 550 °C has the most developed pores and the best combustion performance with the increase in pyrolysis temperature, the average reaction activation energy decreases first and then increases, and the char prepared at 550 °C has the lowest activation energy. When the combustion heating rate is 5 °C min<sup>−1</sup>, the experimental curve and theoretical curve have a higher coincidence, and the combined mechanism function is adopted. The number is more suitable than the single most probable mechanism function to describe the combustion process of char. At this heating rate, the fuel reaction conforms to Z–L–T equation and reaction order model, which is limited by three-dimensional diffusion and chemical reaction. The distribution coefficients of the combined mechanism function are 0.4207 and 0.5886.

A New Method Based on Multi-heating Rate Methods for Coal Combustion Parameters

Experimental Analysis of Intrinsic Kinetics and Rate Profiles for Coal Char Conversion under Different Atmospheres

Kinetic Study on Co-Combustion of Pulverized Anthracite and Bituminite for Blast Furnace Injection

Analysis of Coal Spontaneous Combustion by Thermodynamic Methods

Discussion of a New Approach to Study Kinetic Mechanism of Coal Slurry Combustion

Study on Dynamic Reaction Parameters of Anthracite Combustion by Using Different Thermoanalytical Methods

Correction To: Thermal Analysis and Kinetic Modeling of Pulverized Coal Combustion Accompanied with Coke Breeze

Numerical analysis of kinetics of char combustion process and selection of mechanism functions

Non-linear Relationship Between Combustion Kinetic Parameters and Coal Quality

Non-isothermal Thermogravimetric Investigation on Mutual Effect Between Bituminite and Anthracite in Blends for Blast Furnace Injection

Research on Combustion Characteristics of Mixed Fuels of Fly-Ash and Coal

Popescu Method for Combustion Kinetic Mechanisms of Coals

Study on Coal Combustion Features with Thermal Balance

STUDY ON CORRELATIVITY BETWEEN UNBURNED CARBON IN FLY ASH OF BOILERS AND THE COMBUSTION PROPERTIES OF COAL

Thermo-gravimetric Research on Dynamic Combustion Reaction Parameters of Blended Coals

Comparison of Two Methods for Analyzing the Activation Energy of Coal Combustion

A Model-Based Phenomenological Investigation Of Char Combustion Kinetics Through Thermogravimetry

Dynamic and kinetic studies on the oxy-coal combustion using multi-parameter high-speed diagnostics

Experimental Study on Pore Structure and Apparent Kinetic Parameters of Char Combustion in Kinetics-Controlled Regime

Kinetic Study Of Pulverized Coal Combustion

Numerical Investigation of Effects of Diffusion-kinetics Parameters to the Comprehensive Combustion Simulation