Abstract:Low and medium temperature pyrolysis technology is an important way of clean and utilization of low metamorphic coal. In this paper, three kinds of char samples were prepared in tube furnace according to different pyrolysis temperatures, and their combustion characteristics were compared by means of thermal analysis. Three modeless kinetic methods, KAS, FWO and Fredman, were used to study the combustion reaction activity under nonisothermal conditions from TG curve and DSC curve. In the end, Malek method is used to explore the mechanism function of the reaction process, and the results are analyzed numerically. The objective programming model and MATLAB are used to calculate the combined mechanism function of the reaction process. The results show that with the increase in the pyrolysis temperature, the combustion of char gradually shifts to the high temperature zone and shows a secondary effect between the volatile matter and the combustion characteristic temperature. The results show that the flammability index and burnout index increase first and then decrease, and the char prepared at 550 °C has the most developed pores and the best combustion performance with the increase in pyrolysis temperature, the average reaction activation energy decreases first and then increases, and the char prepared at 550 °C has the lowest activation energy. When the combustion heating rate is 5 °C min<sup>−1</sup>, the experimental curve and theoretical curve have a higher coincidence, and the combined mechanism function is adopted. The number is more suitable than the single most probable mechanism function to describe the combustion process of char. At this heating rate, the fuel reaction conforms to Z–L–T equation and reaction order model, which is limited by three-dimensional diffusion and chemical reaction. The distribution coefficients of the combined mechanism function are 0.4207 and 0.5886.

Numerical Investigation of Effects of Diffusion-kinetics Parameters to the Comprehensive Combustion Simulation

Investigation Of Coal Reactivity Effects On A 1000-Mw Tangential Coal-Firing Boiler

Numerical Simulation on Combustion Characteristics of Biofuels with Different Calorific Values

Numerical Simulation Method and Experimental Validation of a Single Char Particle Combustion Model in Bulk Space

CFD Model of Coal Blends Combustion and Effects of Some Parameters

Experimental and Modeling Investigation of Oxy-Coal Combustion Based on Langmuir-Hinshelwood Kinetics and Direct Calculation of Char Morphology

Numerical Analyses of Effect of Air Distribution on Combustion Characteristics of Tangentially Pulverized Coal-Fired Boiler

Numerical Study on Effect of Fractal Pore Structure on Char Combustion Characteristics

Investigation of Numerical Simulation in Combustion Chamber Predictability

Computational modeling of oxy-coal combustion with intrinsic heterogeneous char reaction models

Diffusion Effect and Evolution of Kinetic Parameters During Coal Char-Co2 Gasification

Progress in Combustion Kinetics

Experimental and Modeling Study on Char Combustion

Direct Numerical Simulation of Char Combustion Based on the Discontinuous Galerkin Finite Element Method

NUMERICAL SIMULATIONS OF GAS DIFFUSION AND REACTION IN FRACTAL PORES DURING CHAR COMBUSTION

Study on Characteristics of Coal Chars Combustion in O2/CO2 at High Temperatures Based a Nonlinear Diffusive Model

Numerical Methods for Complicated Chemical Mechanism Involved in Combustion Simulation

Experimental and Kinetics Studies on the Evolution and Effects of Ash Film During Pulverized Coal Char Combustion

Study On Numerical Diffusion In Numerical Simulation Of Flow Characteristic In Complicated Tangentially Fired Boiler

Numerical analysis of kinetics of char combustion process and selection of mechanism functions

Numerical Investigation of the Effects of Volatile Matter Composition and Chemical Reaction Mechanism on Pulverized Coal Combustion Characteristics