Discrete Ash Inhibition Model of Char Burning for the CFD Modeling of Precalciner

Dan Li,Yang Wang,Zhenshan Li,Iwei Wang

DOI: https://doi.org/10.1016/j.fuel.2024.133067

IF: 7.4

2024-01-01

Fuel

Abstract:Char combustion is the dominant step in pulverized coal combustion system and its combustion time contributes more than 90 % of total residence time. The industry requires the prediction of char combustion kinetics across a wide range of particle conversions, from 0.00 to 99.5 %. The ash contained in char particles has an inhibitory influence on char burnout, which is modeled by the ash film concept considering that a uniform ash film is formed on the char surface and gradually grows thicker during char combustion. However, the continuous ash film concept is rarely supported by experimental evidence. Instead of the progressive formation assumption of uniform ash film in the ash film concept, this work proposes that a coalesce of liberated ash occurs on the char surface, in which is integrated into a particle model to account for the external diffusion of oxygen around the particle. The kinetic parameters in the model include chemical reaction rate constant kO2, ash cluster thickness fic, and O2 diffusion coefficient DO2 through ash cluster. Moreover, the developed ash inhibition model is implemented into CFD simulation suitable for the typical pulverized coal combustion system. Combustion test data of coal conducted in an electric-heated down firing furnace (E-DFF) is used to validate the developed model. It is demonstrated that the model can successfully predict char burnout across a wide range of experimental conditions including temperature, O2 concentration, and residence time in actual precalciner. The evolution of ash cluster thickness, O2 partial pressure on the internal and external surfaces of particles, and the coverage fraction delta as functions of the reaction progress are obtained from the developed ash inhibition model. A sensitivity analysis on the key parameters of the developed ash inhibition model is conducted. In comparison to the ash layer diffusion coefficient DO2 and ash layer porosity Bash, the ash cluster thickness fic has the most significant impact on the char conversion. The developed ash inhibition model is an analytical model that can be easily used in CFD simulations.