Abstract:Low and medium temperature pyrolysis technology is an important way of clean and utilization of low metamorphic coal. In this paper, three kinds of char samples were prepared in tube furnace according to different pyrolysis temperatures, and their combustion characteristics were compared by means of thermal analysis. Three modeless kinetic methods, KAS, FWO and Fredman, were used to study the combustion reaction activity under nonisothermal conditions from TG curve and DSC curve. In the end, Malek method is used to explore the mechanism function of the reaction process, and the results are analyzed numerically. The objective programming model and MATLAB are used to calculate the combined mechanism function of the reaction process. The results show that with the increase in the pyrolysis temperature, the combustion of char gradually shifts to the high temperature zone and shows a secondary effect between the volatile matter and the combustion characteristic temperature. The results show that the flammability index and burnout index increase first and then decrease, and the char prepared at 550 °C has the most developed pores and the best combustion performance with the increase in pyrolysis temperature, the average reaction activation energy decreases first and then increases, and the char prepared at 550 °C has the lowest activation energy. When the combustion heating rate is 5 °C min<sup>−1</sup>, the experimental curve and theoretical curve have a higher coincidence, and the combined mechanism function is adopted. The number is more suitable than the single most probable mechanism function to describe the combustion process of char. At this heating rate, the fuel reaction conforms to Z–L–T equation and reaction order model, which is limited by three-dimensional diffusion and chemical reaction. The distribution coefficients of the combined mechanism function are 0.4207 and 0.5886.

Popescu Method for Combustion Kinetic Mechanisms of Coals

Molecular Reaction Dynamics Simulation of Pyrolysis Mechanism of Typical Bituminous Coal Via ReaxFF

Kinetic Study on Co-Combustion of Pulverized Anthracite and Bituminite for Blast Furnace Injection

A New Method Based on Multi-heating Rate Methods for Coal Combustion Parameters

Analysis of Coal Spontaneous Combustion by Thermodynamic Methods

Nonisothermal Thermogravimetric Kinetic Investigations On Combustion Behaviors Of Concomitant Biomass From Urban Plants

Discussion of a New Approach to Study Kinetic Mechanism of Coal Slurry Combustion

Kinetics of Coal Char Combustion with Random Pore Model under O2/CO2 Atmosphere

Non-isothermal Thermogravimetric Investigation on Mutual Effect Between Bituminite and Anthracite in Blends for Blast Furnace Injection

Kinetic Analysis on Non-isothermal Combustion of Several Urban Biomass Fuels

Correction To: Thermal Analysis and Kinetic Modeling of Pulverized Coal Combustion Accompanied with Coke Breeze

Kinetic Study Of Pulverized Coal Combustion

Comparison of Two Methods for Analyzing the Activation Energy of Coal Combustion

Measurement and Determination of Main Kinetic Parameters of Medium Temperature Pyrolysis Bituminous Coal Char

Numerical analysis of kinetics of char combustion process and selection of mechanism functions

Kinetic characteristics analysis of lignite using differential evolution algorithm: Optimisation model in various reaction mechanisms

Combustion Characteristics and Classify Attribute of Stone Coal

Study on the reaction kinetics model of pulverized coal combustion based on SCT - Part I: Theory and TGA

Experimental and Modeling Investigation of Oxy-Coal Combustion Based on Langmuir-Hinshelwood Kinetics and Direct Calculation of Char Morphology

Study on Burning Reaction Kinetics of Coal Coke in Suspension

Effect of Specific Surface Area and Ash Content on the Mechanisms of Bituminous Coal Char Gasification