Abstract:The micro-mechanical behavior of lamellar structured Ti6Al4V alloy was studied upon a small strain of 4.5 % compressional loading. The strain and stress concentration is found highly related to individual crystallographic orientation, their size, shape and grain-grain interaction, which usually concentrated along grain boundaries (GBs) typically soft and hard GBs owing to the strong strain gradient incurred. The generated local plastic deformation forms ledges through dislocation accumulation which further activate large amount of Geometrically necessary dislocations (GNDs) to accomodate strain incompatibility. Both strain and stress is maximized at some triple points (TPs). EBSD and crystal plasticity (CP) simulation disclosed some long range meso-bands (about 45° to loading direction) across multi-grains and mini-bands within grain interiors (GIs) with concentrated strain behavior which demonstrate slip and ductile behavior of the Ti6Al4V material. Prismatic slip is found dominated the slip behavior of the Ti6AL4V alloy (mostly from surface dislocation activation) which is away from some findings of literature and largely determined by its low critical resolved shear stress (CRSS). Dislocation is observed emitted from high angle grain boundaries (HAGBs) while slip transmission is observed through both low (LAGBs) and HAGBs. The substructures (α-lamellae), a type of LAGBs allocated within α-colonies, have no significant effect to dislocation movement. Fatigue failure can be inferred from the early stage of micro-mechanical behavior mainly judged by the amount of accumulated plastic deformation and induced stress/strain distribution amont the surroundings. Crack may nucleate from easy prismatic slip, local strain accumulation induced by soft and hard grain clustering (either hard embedded in soft or vice versa usually start from some TPs and sharp corners), or some concentrated long range slip activities. Other than the surface dents induced failure, shearing, cleavage, multi-cleavage and intergranular patterns is presumed highly related to the local microstructure, including their relative size, shape, orientation and grain-grain interactions. The multiple crack origins deemed for reduce fatigue life of shot peened samples regardless of the surface compressional residual stress being generated. The work helps understand the micro-mechanical deformation behavior (down to dislocation level) of Ti6Al4V alloy. Their fatigue and fracture can be inferred from such early stage of strain/stress behavior considering microstructural heterogeneities for similar alloys.

Micro-Scale Plastic Deformation of Polycrystalline Ti3sic2 under Room-Temperature Compression

Low-Temperature In Situ Large Strain Plasticity Of Ceramic Sic Nanowires And Its Atomic-Scale Mechanism

Insights into High‐Temperature Uniaxial Compression Deformation Behavior of Ti3AlC2

Mechanical properties of polycrystalline Ti3SiC2 at ambient and elevated temperatures

Near‐surface plastic deformation in polycrystalline SrTiO3 via room‐temperature cyclic Brinell indentation

Extreme dislocation-mediated plasticity of yttria-stabilized zirconia

Compressive Strength and Damage Mechanisms in Ceramic Materials. I. The Role of Subcritical Tensile Microfracture Processes in Compression Failure of Ceramics. II. Electron Channeling Study of Fracture in Alumina-Evidence for Crack Tip Plasticity.

Lattice Bending, Disordering, and Amorphization Induced Plastic Deformation in a SiC Nanowire

Micro-mechanical behavior of lamellar structured Ti6Al4V alloy upon compression via experimental and crystal plasticity study

Abnormal mechanical hysteresis behavior of Tyranno-ZMI SiC/SiC containing Ti3Si(Al)C2

Understanding Large Plastic Deformation of SiC Nanowires at Room Temperature

The study of mechanical properties of Ti3SiC2/Y TZP ceramics composites

Achieving room temperature plasticity in brittle ceramics through elevated temperature preloading

Revealing hot deformation behavior of Ti 2 C-Ti composite and associated dynamic recrystallization mechanism of ceramic matrix

Machine-learning potentials for nanoscale simulations of deformation and fracture: example of TiB$_2$ ceramic

Plastic Deformation Mechanism and Slip Transmission Behavior of Commercially Pure Ti during In Situ Tensile Deformation

Synthesis and Mechanical Properties of In-Situ Hot-Pressed Ti3SiC2 Polycrystals

Effect of Nanoindentation Temperature on Plastic Deformation of 3C-SiC Based on the Molecular Dynamics Method

In Situ Tem Study of Deformation-Induced Crystalline-To-Amorphous Transition in Silicon

Atomistic Simulations of Superplasticity and Amorphization of Nanocrystalline Anatase TiO2

Compression deformation of WC: atomistic description of hard ceramic material