Abstract:It is extremely difficult to obtain high output power with silicon based processes, which presents one of the greatest challenges for realizing fully integrated transceivers, especially at millimeter-wave frequencies. For this reason, various power combining methods have been proposed to achieve higher power levels.In this paper, a novel power combining method suitable for millimeter-wave applications is presented. The power combining network is synthesized in package utilizing wafer level packaging technology, with an array of power sources of moderate output power capability assumed to be distributed on chip, which means applying further combining in addition to existing on-chip power combining scheme for potentially even higher output power is possible.The power combining network is composed of more basic power combining units, each consisting of one substrate integrated waveguide (SIW) resonator coupling four lambda/4 standing-wave resonators, which can be synthesized using two quarter-wavelength vertical vias with one end open and the other end shorted. For power combining purpose, the open end of each lambda/4 resonator is connected to the differential output of one on-chip power source, while the shorted end is realized using one of the two metal plates of the SIW resonator. The coupling between the SIW resonator and lambda/4 resonators is through slotting on the metal plate to allow magnetic leakage so that oscillation in lambda/4 resonators will excite the SIW resonator to oscillate. As the quality factor of the SIW resonator is much larger than those of lambda/4 resonators, energy is mainly confined in the cavity of the SIW resonator so that power combing is achieved.Example design for 60 GHz application is detailed in the paper with simulation results using commercial CST software showing the effectiveness of the power combining method.

A Novel Transformer-Based Mm-Wave Frequency Doubler with Enhanced Output Symmetry

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

Ultralow Power K-Band Frequency Doubler with Differential Output

A Novel Four-Port Configuration With Improved Efficiency and Power-Handling Capability for Diode-Based Doublers in Submillimeter Waves

A 19.5% Efficiency 51–73-Ghz High-Output Power Frequency Doubler in 65-Nm CMOS

An 8.3% Efficiency 96–134 GHz CMOS Frequency Doubler Using Distributed Amplifier and Nonlinear Transmission Line

Frequency Multiplying Optoelectronic Oscillator Based on Nonlinearly-Coupled Double Loops.

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

Novel Millimeter-Wave Power Combining Utilizing Wafer Level Packaging Technology

Input Signal Distribution Using Coupled Lambda/2 Standing-Wave Oscillators For Coherent Power Combining

A Novel Architecture for Frequency Doubler Featuring Compact 3-D Stacked Packaging and Four Multiplying Structures

A Balanced Frequency Doubler Covering 140-220 GHz With an Efficiency of 6.8%-11.6%

Optimally Matched 189-232 GHz 6.8 dBm Output Power CMOS Frequency Doubler

A 26-38GHz Ultra-Wideband Balanced Frequency Doubler in 0.15µ m GaAs pHEMT Process

A 5.1 Dbm 127–162 GHz Frequency Sextupler with Broadband Compensated Transformer-Based Baluns in 22nm FD-SOI CMOS

A Frequency Doubler With Second Harmonic Feedback for Wideband, Efficient Frequency Multiplication at Millimeter-Wave

Design of a Novel D-Band Frequency Doubler

A 170‐ to 260‐GHz Full‐Band Frequency Doubler Realized by Impedance Compression Matching Technique

Full Waveguide Matching Design for 220 GHz Frequency Doubler

A Waveguide Reconfigurable Multiband Terahertz Frequency Doubler Using Choke Flange Technology