Abstract:Recently, several studies have been done by various groups to understand the memory effects behind organic materials, which include understanding in terms of conformation changes, conjugation modification and oxidation-reduction process. In this paper, a WORM (write-once read-many times) memory device using a new polymer material 2-(9H-carbazol-9-yl)ethyl methacrylate (PCz) containing carbazole donor group has been demonstrated. The device uses a MIM (metal-insulator-metal) structure with ITO coated glass as bottom electrode, the synthesized polymer material PCz as the active layer and Al as the top electrode. The toluene solution of PCz was spin-coated on the ITO, followed by solvent removal in a vacuum chamber. Finally, Al was thermally evaporated through shadow mask onto the PCz film. The memory effect of PCz was observed in the I-V characteristic of the MIM structure. The as-fabricated device is found to be in its OFF state, and can be programmed to ON state which is not reversible. The WORM device exhibits a high ON/OFF current ratio of up to 10 6 , and shows a good retention time for both the ON and OFF states which can be sustained within a 24 h timeframe, and extrapolated to sustain for another 10 years. The effect of continuous read pulse on the ON and OFF states was evaluated and no resistance degradation is observed for read cycles up to 10 7 times. By comparing the electrical characteristics of PCz and PVK as well as their optimized geometry simulation corresponding to their minimized energy states, the memory effect or bi-stable states of PCz can be attributed to the long linker between the carbazole groups and backbone present in PCz which play a part in the conduction mechanism.

A flexible polymer memory device

Flexible Single-Component-Polymer Resistive Memory for Ultrafast and Highly Compatible Nonvolatile Memory Applications

Flexible Polymer Device Based on Parylene-C with Memory and Temperature Sensing Functionalities

Novel polymer resistive memory based on parylene with high compatibility and scalability

Nonvolatile Polymer Memory Device Based on Bistable Electrical Switching in A Thin Film of Poly(N-Vinylcarbazole) with Covalently Bonded C-60

Flexible Metal‐Free Memory Electronic Made of Π‐conjugation‐interrupted Hyperbranched Polymer Switch and Reduced Graphene Oxide Electrodes

A Low Onset Voltage Worm Type Polymer Memory Based On Functional Pes

Conductivity Switching and Electronic Memory Effect in Polymers with Pendant Azobenzene Chromophores

Polymer Memories: Bistable Electrical Switching and Device Performance

A Donor-Acceptor Structured Conjugated Copolymer for Flexible Memory Device

Resistive Switching in Organic Memory Device Based on Parylene-C With Highly Compatible Process for High-Density and Low-Cost Memory Applications

Non-volatile WORM Memory Device Based on an Acrylate Polymer with Electron Donating Carbazole Pendant Groups

An electrospun polymer composite with fullerene-multiwalled carbon nanotube exohedral complexes can act as memory device

A Universal Strategy for Stretchable Polymer Nonvolatile Memory via Tailoring Nanostructured Surfaces

Electrochemical Fabrication of A Memory Device Based on Conducting Polymer Nanocomposites

Memory performance of a thin-film device based on a conjugated copolymer containing fluorene and chelated europium complex

Transient and Flexible Polymer Memristors Utilizing Full-Solution Processed Polymer Nanocomposites.

Bi-stable State for WORM Application Based on Carbazole-containing Polymer

Forming-Free Resistive Switching Memory Based on Lifepo4 Nano-Particle Embedded in Conjugated Polymer

Resistive Switching in Organic Memory Devices for Flexible Applications

Reduced Graphene Oxide Electrodes with Wrinkled Surface for Nonvolatile Polymer Memory Device Compatibility