Abstract:<div><h2>Abstract</h2><p>Flexible pipelines must be designed considering the extreme situation for which additional components are needed against severe loading and environmental conditions. Tensile armor is employed in case of high tensile forces, which increase with water depth; and massive components used against high internal and external pressures. In this paper, the mechanical behavior of the pipe under pure tension is investigated by both theoretical and numerical analysis, then the contribution of the external pressure to the axial problem is examined using an analytical analysis. As the deformations along the longitudinal direction of the studied pipe highly depend on the radial stiffness of the cross section, the influence of the pressure armor is carefully evaluated in the inception phase, and its radial stiffness is verified by its own numerical results. The plastic behavior for both steel and polymer layers is taken into account by using the secant modulus method. Moreover, this work answers a question raised by producers that need to know when tensile armor is required to reinforce Metallic Strip Flexible Pipes (MSFP). The theoretical model is employed to carry out the comparison between pipes with different configurations, in order to investigate the influencing parameters of the tensile stiffness. The results obtained from the theoretical and the numerical simulations lead to a remarkable confidence in the analytical solution thanks to a relatively small difference between the outcomes.</p></div>

Bending Moment Capacity of Pipes

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Analysis on Ultimate Bearing Capacity of Deepwater Submarine Pipe

Collapse Capacity of Corroded Pipes under Combined Pressure, Longitudinal Force and Bending

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Bending Capacity of Corroded Pipeline Subjected to Internal Pressure and Axial Loadings

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

On the Collapse Failure of Dented Pipes under Bending Moment and External Pressure

Compressive strain capacity of cold bend pipes

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Mechanical Responses of Metallic Strip Flexible Pipe Subjected to Combined Bending and External Pressure

Mechanical behavior of thin tubes under combined axial compression and bending

Mechanical Analysis of Flexible Pipe During Installation

Asymmetric buckling of offshore pipelines under combined tension, bending and external pressure

Failure Bending Moment for Pipes with an Arbitrary-Shaped Circumferential Flaw

Mechanical Behavior of Steel Pipe Bends: An Overview

Bending failure of the corroded pipeline subjected to initial internal pressure and axial compressive force

Tensile strength of the unbonded flexible pipes